Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 706 to 720 of 1386
-
8th January 2009, 09:42 AM #706Senior Member
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 330
replacement stanley blades & chisels
TS. No cap iron, blade only with stage 2 finish .
In regard to the chisels I will leave it up to you, the small chisels are of little use, actually I was mainly after the the 25mm, if some one is only after the smaller sizes I would take the 12mm as well and make it a set of 4??
Thanks for your trouble, this must be a real headache.
Mac
-
8th January 2009 09:42 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th January 2009, 10:06 AM #707
Outsider, basically what SilentC said is right. If you get a bevel ground for you, it will be flat ground, and all it will do is save you maybe 1 - 3 minutes on the grinder, depending how cautious you are. Since the blades are only 2.5 thick, it would be very easy to do yourself. Honestly if you have a grinder I would get my blade with no bevel, and save yourself the $5.
In addition, even if you get your bevel ground for you, it will be a flat bevel, the odds are that you will need to give the blade a nats dick lick on the grinder, to get a slight hollow grind.
-
8th January 2009, 10:18 AM #708
TS,
I'll take the smaller chisels (3, 4.5, 6, 9) to make the complete set from Mac's order.
So... stage 3 with ferruls for this lot to add to my existing order.
PS...I must not order any more stuff. I've hit the hard limiter. Even dbx noise reduction can't help. (sound joke)
Kevin
-
8th January 2009, 10:19 AM #709
thumbsucker
no bevel on my plane blades, pleaseregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
8th January 2009, 10:29 AM #710
I am starting a list members who are after Partial set's or individual chisels.
- Mac: 25 mm.
- JDF: 6 mm, 12 mm and 25 mm.
- Thumbsucker: two 6 mm, two 9 mm and two 12 mm
If you want to join the list, PM or post back with what you are after. We only have 4 complete set's of chisels left.
Kevjed, I am not taking any new orders from you. I am starting to fear your swmbo. I will see if we can match members up before I allocate any more to you.
-
8th January 2009, 01:06 PM #711Senior Member
- Join Date
- Mar 2005
- Location
- Jindabyne
- Age
- 74
- Posts
- 158
Plane Blade Bevel
Thumbsucker
no bevel on my plane blades,
Thank youBrian
Creator of Fine Firewood
-
8th January 2009, 03:13 PM #712
No bevel required on any of my plane blades
-
8th January 2009, 03:46 PM #713Senior Member
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 330
replacement stanley blades and firmer chisels
TS.
In regard to my order for chisels and or chisel? I think I will take them in a stage 3 condition with brass ferrels, this way it will be less of a problem in forwarding them on to me,
I can visualise the courier or posty being stabbed during transit, they will be a lethial weapon.
Once again thanks for your trouble.
Mac
-
8th January 2009, 08:03 PM #714
T.S. no bevel on my Stanley blades please.
-
9th January 2009, 12:33 AM #715
TS, no bevel on my plane blades please.
"There is no dark side of the moon really. Matter of fact it's all dark."
-
9th January 2009, 08:27 AM #716
No Bevel Required
TS
No bevel on my plane blades requiredRegards
Brendan
Magpie: adj, of or like a magpie; characterized by the habit of hoarding ascribed to magpies.
-
9th January 2009, 09:16 AM #717Intermediate Member
- Join Date
- Aug 2007
- Location
- Brisbane
- Age
- 43
- Posts
- 45
TS,
Could I have my Stanley plane blades with no bevel please.
Also, could I please add to my order:
2 x 100mm lengths of M2 50 x 6mm for wooden hand planes.
I'm assuming that these will not come with bevels, but if there is an option, no bevel is required.
Thanks,
Will
-
9th January 2009, 10:05 AM #718
TS I can't remember if I sais wanted bevel on my plane blades. If you can change it to no bevel, that would be great.
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
9th January 2009, 10:44 AM #719
jmk89, Brendan1152, Jack E, NCArcher, switt775, Outsider, I have updated your orders.
Willard, I have added your two plane blades for wooden plane blades. All of the wooden plane blades will have a 25º bevel, because they are 6 mm thick it is not an easy thing to grind a bevel on such thick blades. We learned this in batch order 01. So no option.
-
9th January 2009, 05:10 PM #720Intermediate Member
- Join Date
- Aug 2007
- Location
- Brisbane
- Age
- 43
- Posts
- 45
Sounds good TS, it's always good to learn the easy way (from someone else's previous experiences!).
Will
Similar Threads
-
History of Stanley/Bailey Bench Planes
By silentC in forum HAND TOOLS - UNPOWEREDReplies: 29Last Post: 1st December 2010, 08:27 PM -
Bulk Brass Order
By thumbsucker in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 149Last Post: 3rd November 2008, 08:58 AM -
Replacement Stanley blade
By matto1 in forum HAND TOOLS - UNPOWEREDReplies: 2Last Post: 13th August 2008, 09:49 PM -
Scraper insert for stanley bench planes
By Woodlee in forum HAND TOOLS - UNPOWEREDReplies: 4Last Post: 12th May 2008, 12:26 AM -
Replacement Blade For Stanley No 6
By Pat in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 27th June 2005, 10:27 AM