Thanks: 0
Needs Pictures: 0
Results 46 to 57 of 57
-
29th December 2016, 07:57 AM #46
Aha! I hadn't got around to researching it for myself, but I've always thought it must've been done by some very simple (& quick!) method, judging by the ubiquity of wheat-ears on saw handles. Rotary cutter or not, you still did a very neat job of it. Methinks you may have practised a while on a few bits of scrap before committing your nicely-shaped handles to the D.P.?
So there you go, thankyou, Paul, for that tidbit of information. And your 'carving' is even more authentic than we thought!
Cheers,IW
-
29th December 2016 07:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th December 2016, 10:17 AM #47GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
I have been using my CBN wheel and recently received Shapton glass stones to sharpen my chisels, simply stunning results in a few minutes for each chisel! The Incra rules as mentioned and something I bought thinking it was a bit of a gimmick and use all the time a BMI measuring tape, it is so good I bought a second one as well. https://www.gettoolsdirect.com.au/bm...429241020.html
CHRIS
-
29th December 2016, 10:17 AM #48
Ian
I did have the forethought to do a few trial runs first, which was just as well! Like everything, there is a little bit of a knack to it. Also to some extent it is an issue of confidence (and practice).
However, the "stems" were hand carved with a vee shaped tool. The FRG does not respond well to such an imposition. The early american handles were made from more forgiving timbers including apple, beech, occasionally mahogany and Brazilian rosewood (Disston's D115/D15 and Atkins' 400/401).
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
29th December 2016, 10:24 AM #49
-
29th December 2016, 04:47 PM #50GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,503
Any mention of BMI at Xmas time usually has me thinking I ate too much plum pudding.
-
4th January 2017, 03:38 PM #51SENIOR MEMBER
- Join Date
- Oct 2005
- Location
- Yangebup, Perth
- Posts
- 444
I haven't actually used it yet, but I brought home Dads favourite No5 that he used as a chippy for many years. It has been sitting on the bench at Mums for the last four years with his nail bag and hammer and I didn't want to take it. It was starting to get a bit of surface rust on the sole though so I thought it was time to get it shaving wood again. Very sentimental about this one.
The world is a comedy to those that think, a tragedy to those that feel.
-
4th January 2017, 04:01 PM #52GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
TBH it doesn't do anything a normal tape does but it fits in my pocket, has very nice easy to read graduations, sits flat on the job so making marking from the tape easy instead of having upward curved sides, no sliding end hook, no spring mechanism to fail. Have you tried one Brett? Most who do become converts from what I can see.
CHRIS
-
4th January 2017, 05:21 PM #53
-
4th January 2017, 08:31 PM #54
-
4th January 2017, 09:22 PM #55
My Shapton Pro stones and Veritas honing set lately. I was always super lazy about sharpening because it took ages setting up with all the sandpaper, glass and clamps etc but now it's a really quick process.
Made a huge difference to the quality of my chisel work, my blades weren't even close to sharp before and this was making life really hard even on soft stuff like pine.
-
4th January 2017, 11:04 PM #56GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
Come down and give me a hand to find it!! I have the three metre version as well but it has dual scales on it so I bought the two metre version which is metric only. The problem with the three metre dual scale for me was the metric scale was sometimes on the wrong side and to turn it over made me work left handed and that was never going to happen.
CHRIS
-
18th January 2017, 10:31 PM #57
This guy, just added it a to the kit about a week ago!
Absolutely adore my Incra rules, have the 150mm plain ruler as well and I honestly don't know how I got by without them now. Makes layout such a breeze.
Similar Threads
-
gramophone needs loving
By SawDustSniffer in forum RESTORATIONReplies: 5Last Post: 25th December 2011, 09:09 PM -
A Loving Husband
By bullfright in forum WOODIES JOKESReplies: 1Last Post: 3rd July 2011, 11:14 AM -
A Loving Wife
By wheelinround in forum WOODWORK - GENERALReplies: 14Last Post: 28th October 2009, 10:23 AM -
Loving old couple
By Allan at Wallan in forum WOODIES JOKESReplies: 0Last Post: 11th August 2007, 04:03 PM -
A loving husband
By Geoffsa in forum WOODIES JOKESReplies: 0Last Post: 2nd August 2006, 04:28 PM