toothing plane blade advice needed

**auscab** · 11th August 2017, 10:43 PM

Toothing clear Radiata Pine to take sawn Mahogany veneer / facing on the sides and drawer fronts of this chest, Or Comode.
I traversed planed this with a no 6 which had either a flat blade rounded at the corners , Or it had a shallow camber , I cant remember how it was sharpened at the time now . But try and get it as flat as possible and then let the toothing plane show you how out you were.

Edit . Im just looking in close and I think I was toothing this straight off the thicknesser . I can see machine marks . I do tooth straight off the machine as well for the same reasons. Picture three in from the left is what Im looking at .

1 160.jpg 1 161.jpg 1 162.jpg 1 163.jpg IMG_3031.jpg
1 192.jpg

Rob

**auscab** · 11th August 2017, 10:52 PM

I accidentally hit auscab wants pictures on your last post Greg . Not sure how I did that

.
Rob

**coffeefro** · 13th August 2017, 08:45 PM

Rob,
Pictures will come eventually, but instead of the cauls and battens I'd hoped for, the day produced plants, dowels, poking about in a junk shop, lunch and far, far too much time spent with an uncooperative petrol-powered shredder. I think I have a much broader view of the subject now thanks to your and other's advice.

Greg

Thread: toothing plane blade advice needed

Thread Tools

Search Thread

Similar Threads

Bevel up Toothing Plane.

Mathieson toothing plane mouth clogging help needed

saw blade advice for ts-10L needed

Advice needed. New blade and plane mouth

Posting Permissions

	ANZAC DAY The spirit lives on. They shall grow not old, as we that are left grow old Age shall not weary them, nor the years condemn. At the going down of the sun and in the morning, We will remember them. Lest we forget.
This day our nation unites to commemorate the sacrifice of fallen servicemen and women during times of war. And the Band Played Waltzing Matilda \| Mothers Daughters Wives \| I Was Only Nineteen \| Diggers Lament