Needs Pictures: 0
Results 1 to 15 of 16
Thread: A 'traditional' saw vise
-
13th March 2016, 06:41 PM #1
A 'traditional' saw vise
I think I posted some pics of this saw vise before, but can't find where. Anyways, some folks are planning a saw-sharpening GTG, and the subject of saw vises suitable for hand saws came up. This is the type of saw-sharpening vise my dad and thousands of other chippies up to his time would knock up on the job, from scraps lying around, in a very short space of time. It must be a good 55 or more years since I last watched him make one, so I was working from memory and first principles when I made this: Saw vise 2.jpg
They were usually made with longer stiles, which either sat on wide feet (& were steadied by the sharpener's feet) or were clamped to some convenient stable object where there was good light. Mine is made to fit in the wide front vise of my bench, holding it at a convenient height for me.
There are few critical dimensions for these things. The principle of them is that a wedge-shaped cutout on each stile engages a couple of matching angled trenches in the jaws. When the jaws are tapped into the 'birdsmouths' in the stiles, they are forced tightly together. Here is a rough sketch which should be self-explanatory. The dimensions are to suit my saws (& partly dictated by the size of the scrap hardwood I had on hand on the day ), but make sure the jaws, in particular, will give sufficient strength & stiffness:saw vise sketch.jpg
You can join the stretcher to the stiles any way you like - a half-lap join & a couple of screws was common, but you could use a wedged through-tenon if you want to be fancier. I used tusked tenons because I wanted to be able to dismantle it: saw vise front.jpg
Here are the jaws sitting in the birdsmouth, so you can see the trenches: jaw trenches.jpg and tapped home: jaws closed.jpg
Apart being sufficiently stiff, the jaws need to overhang the stiles and be shaped a bit to accomodate the saw handle, as indicated by the arrows:jaw ends ann.jpg and you'll need a slot extending from the bottom of the birdsmouth to take the blade: Jaw ends II ann.jpg
The bolt across the stile had to be added when I got a bit enthusiastic tapping the jaws home & it started to split.
Last job is to bevel the sides of the jaws so you can file sloped gullets on crosscut saws.
Older readers will be well aware of these simple devices, but they are not so common since the Skilsaw became king on building sites...
Cheers,IW
-
13th March 2016 06:41 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th March 2016, 07:13 PM #2SENIOR MEMBER
- Join Date
- May 2010
- Location
- Bendigo
- Posts
- 776
That's just brilliant Ian. How i love seeing how old woodies went about every task, built their own tools etc.
-
13th March 2016, 07:16 PM #3
Just a few quick questions
The bird mouth angle tho I imagine it's not really critical would around 5/10 degrees be enough.
Also the split to carry the blade would it not be better to end that in a small say 13 mm hole to stop any further splitting.
Yes I know you used a bolt
But if one was building from scratch.
-
13th March 2016, 07:39 PM #4
Matt, if you enlarge the sketch, you'll see the angle of the birdsmouth is shown, and it is indeed, approximately 10 degrees...
Good point about putting a round hole at the bottom of the V. In fact, that's exactly what I did, however, because you need to add a slot for the blade, it's value in preventing splitting is probably cancelled. I suspect the Tas oak/Vic Ash (whatever) I used was just a bit more splitty than the stuff my old pot selected, but in any case, a bolt is a very inexpensive item.....
Cheers,IW
-
13th March 2016, 09:08 PM #5
Thanks Ian will enlarge the pics
-
14th March 2016, 01:00 AM #6GOLD MEMBER
- Join Date
- Jun 2014
- Location
- Seattle, Washington, USA
- Posts
- 1,857
Thanks, Ian. You may remember I've mentioned copying this design a couple of times, so it's good to have this thread as a resource.
There was, however, one thing about it I thought about modifying upon first inspection. You mentioned the bolts being installed after building it to prevent it splitting further. It seems like it's only a matter of time before splitting occurs, given that it's a wedged fit, so do you think it would make sense to just go ahead and drill holes and glue in dowels during the build? Maybe two per side? Would this achieve the same kind of split prevention with a bit cleaner aesthetic? If not, could you make a recommendation?
Cheers,
Luke
-
14th March 2016, 09:56 AM #7
Ian
In the distant past I made a vice similar to yours except it was he traditional freestanding affair. I remember that the jaws were both deeper and narrower. They may have been 75 x 25. My memory again is that there was no need to cut a slot in the legs to accommodate the saw plate. It occurs to me that the deeper the jaws are made the less likely it is the legs will need to be cut with a slot.
A further thought is that this style of saw vice is clamped at either end. To what extent do you think it would be beneficial to plane the ends of the jaws on the inside at both ends? Only a little. Perhaps 1mm. This would ensure that the middle of the jaws are tight on the saw plate. The sloped lapped joint on the legs automatically tightens the ends as intended.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
14th March 2016, 08:10 PM #8
Luke, my way would be to make the vise & see how it goes. You may not have a problem, it will depend on the wood you select for the stiles. There were thousands of these built, and most seem to have lasted pretty well, which is why I put my problem down to poor selection of wood. If you do have to dowel as a remedy, it won't make much difference if you put them in before or after signs of trouble arise. I know you prefer a 'wooden' solution, but the bolt was very easy, very quick & is very effective....
Cheers,IW
-
14th March 2016, 08:15 PM #9
Paul, that's exackery what I done. I should've been more specific, instead of saying " a bit of judicious planing might be needed...".
So my apologies to all; anyone making the vise, please substitute Paul's more detailed instructions for my more flippant line.....
Cheers,IW
-
15th March 2016, 08:54 PM #10
I had one of those, "Where have I seen that before moments". For some reason, I knew it was
In an Australian book, but could I find it? So ubiquitous was this style of saw vice that most of the Aussie writers of the hand tool era didn't mention how to make one. Alex Smith John Walton and C H Lloyd show the small metal ones when they mention a saw vice, but the Department of Labour's Carpentry and Joinery, which was aimed at demobbed servicemen after WW II who would likely be on worksites, shows the saw being filed in a wooden vice of this kind but makes no mention of how the vice was made - presumably they thought one of the old hands would show you how .
In the end I found it in Andrew Waugh's The Handyman's Complete Carpentry Guide. He was 'Handy Andy' in the Sydney Telegraph and he bothered to put in a page on making a saw vice. I'll try to scan the page or so tomorrow and post the scan so you can all see his take on this unsung hero of the Aussie worksite.
Screwing up in new ways every dayCheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
16th March 2016, 08:33 AM #11
Good on yer, Jeremy. I searched for some more detailed instructions, too, just in case there was some vital detail that has eluded me, but came up blank. I'm sure I've seen it somewhere on the web in the past, but the search engines seem to have forgotten about it. All I could find were the more elaborate scissor-type vises like the one on the Popular Woodworking site. They probably work just as well, but I like the no-frills variety.
As you say, this type of on-site saw vise was so common up 'til the 50's that it would be a fair assumption that everyone in the business knew how to cobble one together. They are very simple gadgets, and nothing about them is super-critical - you adjust accordingly as you fit the parts together. Despite being made with nothing more than my vague memory for a plan, mine works.....
Cheers,IW
-
16th March 2016, 09:15 AM #12
Hi Ian
Here it is. It isn't quite the same as yours, but who would expect it to be?
Another project added to the list (because I don't like the small metal vice for handsaws (as opposed to back saws).Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
16th March 2016, 11:09 AM #13
That's good, Jeremy - just about exactly how my dad made his! I managed to cut out the saw vise part and make it a full page that is quite legible, & I've saved it for future use. Thanks for taking the trouble to do that.
It's not a huge project, and anyone should be able to get one going in a morning (after you find the bits of wood you need!). Something I notice is that Handy-Andy makes his 'birdmouths' at a much steeper angle than I made mine. Thinking about it, I reckon that's smart, it will develop less pressure towards the outside when the jaws are tapped in, and will reduce the tendency to split the stiles. I was working from memory for the angle, and I reasoned that the shallower the angle, the better it would grip (as with Morse taper, etc.). That's true, but it also develops more force and increases the chances of splitting. I did remember that the Old Pot made his from 3 inch wide boards (as in the Handy-Andy article), but I wanted to include the 'step' on my stiles so it would sit at a fixed height in the bench vise, so used wider material for those.
So, any prospective makers take note, and disregard my too-steep birdmouth - go with the more shallow angle as shown...
Cheers,IW
-
27th December 2019, 03:28 PM #14
I decided that a good quick project for the Chrissy break was to make one of these according to the description in Andrew Waugh's book.
So here it is.
IMG_0136.jpgIMG_0137.jpg
I used a couple of pieces of Oregon that I had lying about.
The best thing is that I can take this outside an clamp it to a sawhorse. That keeps saw filings off the workbench and usually means there is better light which my aging eyes seem to need!
The second best thing is that the wooden vice dampens the filing noise - the metal saw vice seems to amplify the sound, so this is easier on everyone's ears!Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
27th December 2019, 06:50 PM #15Senior Member
- Join Date
- Mar 2014
- Location
- West Wodonga
- Posts
- 114
Some photos found on goggle which may assist some people.
https://www.google.com/search?client=firefox-b-d&q=saw+sharpening+vise
Similar Threads
-
Building a traditional tail vise - part 1
By IanW in forum THE WORK BENCHReplies: 12Last Post: 14th June 2014, 10:01 AM -
Record QR Bench Vise as a Tail Vise...which size?
By seanz in forum THE WORK BENCHReplies: 2Last Post: 12th September 2013, 06:47 PM -
BENCH VISE and TAIL VISE
By FenceFurniture in forum THE WORK BENCHReplies: 0Last Post: 29th April 2012, 11:13 AM -
Traditional wax
By schaf in forum FINISHINGReplies: 8Last Post: 1st June 2009, 12:43 AM -
Traditional Wax ??
By Doug Baird in forum TIMBERReplies: 6Last Post: 22nd January 2003, 06:17 PM