Thanks: 0
Needs Pictures: 0
Results 1 to 14 of 14
-
15th June 2017, 01:43 AM #1SENIOR MEMBER
- Join Date
- Sep 2009
- Location
- victor harbor sa
- Posts
- 315
Would I have trouble getting this case on a plane?
Hi all,
Despite from looking a bit battered, this old case makes an excellent storage unit for some of the saws that need a cosy place to be stored.
Some time ago there was a post by one of us wanting to use an old case for tool storage. I wonder how that went? If you are reading this
please show us your result.
I have dozens of cases and kit bags that I have over the years, picked up at various garage sales and swap meets, that are now used to store a fair bit
of my tool collection.
Not only are they a handy size to fit all types of tools in, but they also have good latches and a carry handle.
I think there are only two that I have made up internal tills for, this one for back saws and another for a set of Falcon planes.
Anyway, I hope it can inspire some of you to show us your ideas of recycled tool storage.
Graham
-
15th June 2017 01:43 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th June 2017, 03:06 AM #2
As hand luggage, I'd say forget it.
as checked luggage, you would probably want to add a velcro (or webbing) strap under the handle to keep the whole caboodle closed -- especially if travelling through the US where the TSA would probably open the lock with a screwdriver. You would also want to add a block(s) or padding so that once the lid was closed the saws can't move in any direction -- up, down, sidewaysregards from Alberta, Canada
ian
-
15th June 2017, 07:26 AM #3SENIOR MEMBER
- Join Date
- Oct 2011
- Location
- Langwarrin
- Age
- 43
- Posts
- 952
When I was travelling for work, we couldn't take tools on as carry on - but any batteries for cordless tools had to be carry on and put in a clear plastic bag (then declared separately like a laptop etc at security) but that was about 3 years ago so things may have changed.
"All the gear and no idea"
-
15th June 2017, 07:39 AM #4
Quite an interesting idea in the use of old luggage. I would expect that they were made to last air travel and so a good idea to keep valuables in.
-
15th June 2017, 10:24 AM #5
I'm fairly sure that that style of "port" predates mass air travel by many years -- think cruise liners and train travel -- which also means that they pre-date automatic baggage handling.
regards from Alberta, Canada
ian
-
15th June 2017, 07:04 PM #6Senior Member
- Join Date
- Jul 2015
- Location
- Wonthaggi
- Posts
- 256
I'm shocked that you only have ten back saws.
Get serious, man. And find a bigger suitcase.
-
16th June 2017, 12:00 AM #7
Graham
That's a terrific idea. So now I am on the lookout for old suitcases (older the better) and shipping container doors ( a la Simplicity's storage solution).
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
16th June 2017, 09:34 AM #8Try not to be late, but never be early.
- Join Date
- Apr 2011
- Location
- Bakers Hill WA
- Age
- 75
- Posts
- 1,073
I use an old steel trunk to cart around the tools I use to make wooden mallets and I'm sure I wouldn't get it onto a plane. I have to get a hand to lift it into the back of my car, or else half empty it first then reload once it's in there. Since it's too heavy to lug around by the top handle, I've fitted a couple of handles to the ends as well.
The lift out tray was originally designed to have a lid so that its contents didn't fall out when you stood the trunk upright. Then fitting the clamp in the top of the tray meant loosing the lid so now it always stays sitting flat.
Cheers,
Geoff.
-
16th June 2017, 10:32 AM #9SENIOR MEMBER
- Join Date
- Sep 2009
- Location
- victor harbor sa
- Posts
- 315
Geoff,
great use of the old trunk, but as you have found the size and weight ratio is to considered, especially when having to move the storage unit.
With your clamp, are you able to fit it in the lid with the saws, to allow the trays lid to be replaced.
Also, is that a chain auger you have fitted in one of the braces?
If so, could you tell us how you make use of it?
Graham.
-
16th June 2017, 10:56 AM #10Try not to be late, but never be early.
- Join Date
- Apr 2011
- Location
- Bakers Hill WA
- Age
- 75
- Posts
- 1,073
Put the clamp in the lid.....take 10 points Graham, I'll look into that ASAP. I probably should lighten the load by splitting it between two suitcases.
Yes chain drill, I use it with a centre bit to bore the hole in the mallet head. It's a Millers Falls No 718 which is the clutched, self feeding model.
Cheers,
Geoff.
-
16th June 2017, 11:18 AM #11GOLD MEMBER
- Join Date
- Jun 2014
- Location
- Seattle, Washington, USA
- Posts
- 1,857
My first thought is:
"Where would he be going where he would need eleven backsaws?"
My second thought is:
"I hope I'm invited"
-
16th June 2017, 08:36 PM #12
-
17th June 2017, 09:54 AM #13Try not to be late, but never be early.
- Join Date
- Apr 2011
- Location
- Bakers Hill WA
- Age
- 75
- Posts
- 1,073
Graham, I had a look at the trunk with a view to putting the clamp in the lid as you suggested, but it's not going to work. A bit hard to see but there is a wide reinforcing rib across the middle, part of which I have removed to accommodate the heel of the saw. It's very rarely that I would want to sit it upright.
Cheers,
Geoff.
-
17th June 2017, 10:32 AM #14SENIOR MEMBER
- Join Date
- Sep 2009
- Location
- victor harbor sa
- Posts
- 315
Paul,
while you're at it, my boots could do with a polish,
and if you were to carry this case, would you be
heading to the same destination as me. hmmm
Seriously though, the till for the back saws was made to keep them separated,
and not scratching each other up.
I have to confess, the only travelling they do is to displays, with the South Historical Tool Association
they have never flown anywhere and are not likely to.
My reason for this thread and it's silly title was to draw out other forum members novel tool storage ideas,
So lets see what falls out of the tree, from a good shake.
Graham
Similar Threads
-
Having trouble using a Jack Plane to get consistent shavings
By Tegmark in forum HAND TOOLS - UNPOWEREDReplies: 16Last Post: 6th June 2015, 07:56 PM -
Can I get in trouble?
By lubbing5cherubs in forum WOODTURNING - PEN TURNINGReplies: 13Last Post: 30th June 2007, 11:06 PM -
Having trouble...
By Ivor in forum INCRA JIGSReplies: 22Last Post: 11th December 2006, 06:15 PM -
Uh oh, some of you are in trouble....
By silentC in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 12Last Post: 11th June 2004, 12:43 PM