Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
27th February 2015, 08:29 PM #1Member
- Join Date
- Dec 2014
- Location
- Perth
- Posts
- 99
Cheap rip blade for Jet proshop...
G'day. I am planning to get a thin kerf splitter from sharkguard for my older Jet Proshop so I can use the thin kerf diablo blades. They are way behind with their orders (3 months) so I need a cheap rip blade to tide me over. Any suggestions for a 10" 5/8 arbor?
RegardsLast edited by Wol; 27th February 2015 at 08:41 PM. Reason: Cannot type on the bus
-
27th February 2015 08:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th March 2015, 01:27 AM #2Member
- Join Date
- Dec 2014
- Location
- Perth
- Posts
- 99
Events over took plan A, and so I ordered and received a pair of Freud Industrial thin kerf blades (30T and 24T) from the US. Unfortunately they were not available in Australia and substitute items were expensive, and postage needed to be added. I tested the 24T blade on a 4' length of Jarrah 2" thick. It cut easily and very quietly, the finish was very smooth, and no chipping or tearing of the surface was evident. I am very happy with the blade, and the accuracy of the cut. Now all I need is a second table saw so I do not have to change blades for when I need the 80T Irwin Professional which I use for plywood sheets...
-
17th March 2015, 02:06 PM #3SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
Hi Wol,
Would you mind posting the part number of the 30t blade and where you bought it? I would like to upgrade the rip blade on my saw.
Thanks very much.
-
18th March 2015, 12:15 AM #4Member
- Join Date
- Dec 2014
- Location
- Perth
- Posts
- 99
I bought the blades from routerbitworld (http://www.routerbitworld.com/), although they are available from many places including Rockler. (http://www.rockler.com/). I ended up with the LM75R010 (30T) for up to 1" thick rip cuts and the LU87R010 (24T) for thicker cuts. Note I ordered two as postage was the same for one or two blades. I reccomend you check the specifications to make sure they are what you want.
Regards
-
18th March 2015, 04:02 PM #5SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
Thanks for the reply Wol.
-
20th March 2015, 07:55 AM #6
What are the shipping prices like from Router Bit World Wol?
-
20th March 2015, 09:08 PM #7Member
- Join Date
- Dec 2014
- Location
- Perth
- Posts
- 99
Similar Threads
-
Saw blade from cheap disposable stanley
By code4pay in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 6th August 2013, 11:05 AM -
Does anyone have Jet Proshop they can show me?
By Rob from Kew in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 12th August 2011, 09:55 PM -
JET Proshop JPS 10 45deg blade stop
By GarethR in forum TABLE SAWS & COMBINATIONSReplies: 3Last Post: 7th March 2009, 06:55 AM