Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Choosing a Table Saw
-
16th March 2020, 11:03 PM #1Senior Member
- Join Date
- Mar 2014
- Location
- West Wodonga
- Posts
- 114
Choosing a Table Saw
Well the time has come to replace the Triton table saw, and as such looking for a replacement unit.
Starting looking at second hand units, but so far have not seen anything that has really taken my fancy. So with some help from Socmo at the end of the month, I have decided to take the plunge on a new unit. Not long retired so will primarily use for small pieces of furniture, making of segmented wood turning pieces and assorted craft work. Looking for fairly reasonable accuracy and ease of use.
At the moment looking at three units as a starting point: - Sherwood 12in Hybrid Cabinet Saw ($1,699.00), Machinery House ST-254 – 10in Table Saw ($1,375.00) and Laguna Fusion F1 Table saw ($1650.00). The ST-254 and the Laguna saws are both 10in saws, whilst the Laguna is about to be released in Australia. Carbatec have a 10" Cabinet Saw but it is not Dado capable. Is this necessary or a nice to have?
I did consider portable contractor type saws but for a decent one you're up over $1k and for not much more money you can get a decent cabinet saw so figured this is probably the way to go. Currently at the moment I leaning to the Sherwood, but no stocks at the moment.
Would appreciate any comments from users or tyre-kickers to suggest a path to take towards purchasing. Any detail or comments you may make for a machine. Not looking to pay a fortune, but also don’t want a cheap and nasty. Are there other saws to consider or nice to have accessories to make the saw complete.
Thank you in advance. Nifty.
-
16th March 2020 11:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th March 2020, 09:34 AM #2GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
Whatever you buy, it really must have a sliding table, so much better and versatile.
-
17th March 2020, 01:12 PM #3SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
Moving up from a Triton, any saw will be a massive upgrade. So don't over think it.
Go and have a look at each of the machines you're looking at and have a play. You'll quickly realise which of your brands is a worthy buy for your needs. As each of them are designed to fit a specific market depending on your budget.
At the end of the day they'll all do the job and significantly better than the Triton.
In terms of having dado functionality, this depends on what you're planning/like to build/how fast you'll like to build. As there are many ways to skin a cat. Personally I wouldn't miss it if I couldn't do dados, my dado set gets pulled out probably once every 6 months or so if that. Most of the time, because i do once offs, i just do multiple passes and clean up with a router plane or similar.
In terms of accessories feather boards, mitre fences (incra) or push blocks are worthy of mention.
-
17th March 2020, 01:24 PM #4SENIOR MEMBER
- Join Date
- Aug 2012
- Location
- Gympie
- Posts
- 219
+ an outfeed table. Whether you make one yourself or buy one. I would not operate a tablesaw without it.
Regards,
Ross
-
17th March 2020, 07:44 PM #5
My first (and only) table saw was a Carbatec 10" cabinet saw. It's a good saw but after a little while you start to notice little things that just arent quite right or could have been done better.
After looking at a Laguna saw in person I think that would have been the better choice. The Lagunas tend to be just a little less powerful for any given price point but I think the quality is up there.
Doesnt sound like you will be stressing the saw a lot so the 1.5hp motor should be fine in my opinion.
-
17th March 2020, 08:41 PM #6Senior Member
- Join Date
- Feb 2012
- Location
- Newcastle
- Posts
- 337
Definitely choose a saw with a riving knife (rises and falls with the blade, top is slightly lower than the blade), not a splitter so that it can be kept in place for non-through cuts and never removed and forgotten.
Make or buy an overhead mount from the rip fence side of the table that holds the guard above the blade and feeds the dust hose over the top, so you can keep it in place for all kinds of cuts and it doesn’t get in your way, like this (can be simpler, but this one is a good example) Axminster Trade Shark S-12 Overhead Crown Guard - Table Saw Accessories - Sawing - Machinery Accessories - Accessories | Axminster Tools & Machinery
-
17th March 2020, 08:52 PM #7
-
18th March 2020, 10:51 AM #8Senior Member
- Join Date
- Feb 2012
- Location
- Newcastle
- Posts
- 337
Just remember that if the splitter raises and lowers, you can grind it down to be the shape of a riving knife if you make an alternative overhead guard.
Similar Threads
-
Help Choosing A Router Lift For The New Router Table
By RoyG in forum ROUTING FORUMReplies: 26Last Post: 2nd May 2017, 11:55 AM -
Help with choosing a table saw please.
By Tubebuilder in forum TABLE SAWS & COMBINATIONSReplies: 3Last Post: 7th April 2011, 09:32 AM -
Choosing the right paints for a table
By BurntToad in forum FINISHINGReplies: 2Last Post: 21st July 2008, 12:56 AM -
Choosing a Router Table
By KBnLink in forum ROUTING FORUMReplies: 10Last Post: 14th October 2006, 06:10 AM -
Choosing a Table Saw
By Dion N in forum TABLE SAWS & COMBINATIONSReplies: 4Last Post: 21st August 2004, 11:02 PM