Thread: dewalt DWE7491-XE table/bench saw.

Have you checked the internet, heaps there.
I just checked.

Originally Posted by verawood

Have you checked the internet, heaps there.
I just checked.

this.

HEAPS of youtube videos about it. covering your exact questions.

Thank you verawood for your reply. i will see how i go with this youtube thingy, my boys tell me that technology and old fellows should not be let mix. thanks again really appreciate your efforts.

Originally Posted by deckell

Thank you verawood for your reply. i will see how i go with this youtube thingy, my boys tell me that technology and old fellows should not be let mix. thanks again really appreciate your efforts.

You can safely tell your boys that it's more up to their generation to make technology that is logical for us oldies to understand.

I hope you find enough to answer your questions.
Good luck.

I have one of these units, I find it quite a good, it was good out of the box. Fence is quite substantial. I have put mine on a mobile base. You will probably find it’s a bit louder than your triton set up. Has a reasonable dust chute on rear. Riving knife is a quick release unit. I mainly do toys, small projects and picture frames.
I did upgrade the original blade to a higher tooth count.
i have mine nearly eighteen months now with no issues.

Thank you potts for your information, i will go ahead and buy one. deckell.

Apart from the obvious “can’t buy it in Bundaberg would need to freight it” have you thought of this?
W452 - SB-12 Table Saw | Hare & Forbes Machineryhouse

more saw for similar money.

cheers
p.s. This is what my triton will turn into when I get the change over cash ready�� only reason I asked.

Thank you wrongwayfirst for your information. we have two stores in down that have these in stock. what do think would be a fair price to ask for the triton 2000 in good condition. deckell.

Originally Posted by deckell

Thank you wrongwayfirst for your information. we have two stores in down that have these in stock. what do think would be a fair price to ask for the triton 2000 in good condition. deckell.

$200 - $400 pending condition

more if with saw, extension table etc.

I have seen rusty ones for $150-$200 but you never find out if they sell or get removed.

good luck, cheers