Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Felder diamond saw blade
-
25th January 2023, 10:45 PM #1
Member
- Join Date
- Dec 2016
- Location
- Edensor Park NSW
- Age
- 33
- Posts
- 97
Felder diamond saw blade
Hi guys, I have recently seen this video on YouTube reviewing felders Diamond saw blade. I was wondering if anyone has any experience with the blade and is it as good as it looks? I'd pay good money for a blade that can do all that he does in the video.
And if it's not the best blade on the market, what is?
I have a Felder kf700s panel saw without a scoring unit for reference
https://www.youtube.com/watch?v=xyDjod56UJg&feature=youtu.be
Thank you everyone and happy Australia Day for tomorrow
Sent from my CPH2025 using Tapatalk
-
25th January 2023 10:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
26th January 2023, 05:35 AM #2
GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
Chris Parks here on the forum has one.
When I last checked, they were around the $800 mark - and that was pre-COVID
-
26th January 2023, 08:09 AM #3
Member
- Join Date
- Dec 2016
- Location
- Edensor Park NSW
- Age
- 33
- Posts
- 97
Thanks for that. I think $800 isn't too bad, when you consider how many blades it can replace.
Originally Posted by Bernmc
Hopefully Chris sees the post and can lend some insights for me.
Sent from my CPH2025 using Tapatalk
-
26th January 2023, 08:54 AM #4
SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
you cant sharpen that blade (diamond coated not sure if you need to?) and you need to keep it clean. the manual stresses this point...
if you hit a nail or a stone...SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
26th January 2023, 11:46 AM #5
Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Yes you can, but it requires special machinery; the teeth are tipped, not coated, so there is generally enough material there for at least 2-3 resharpens. They can sometimes be re-tipped as well if one is damaged Originally Posted by Albert
You can't use the traditional abrasive method like you do with carbide because there's no material hard enough, so the 2 options in use are erosion by electrical discharge/arc or ablation by laser; in both cases the material is essentially burnt off very accurately. I know AKE Salestech in Melbourne has an erosion machine
-
26th January 2023, 12:57 PM #6
GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 1,135
At $800 i would certain shed a tear if my sawstop went off on one
-
27th January 2023, 01:20 PM #7
Member
- Join Date
- Dec 2016
- Location
- Edensor Park NSW
- Age
- 33
- Posts
- 97
I've read somewhere that they can be sharpened twice normally. And thanks for the ake suggestion. They actually sell there own version of this blade that looks to be the original. I'll have to check them out too. And I'm currently selling my sawstop so I won't have that problem anymore. Haha
Sent from my CPH2025 using Tapatalk
Reply With QuoteSimilar Threads
-
N.S.W. Felder Cross Cut Blade - Sydney
By Henrioliver in forum WOODWORK - Tools & MachineryReplies: 2Last Post: 8th May 2022, 01:02 PM -
N.S.W. Dedicated dovetail blade 7degrees - Felder Power Classic - Sydney
By Henrioliver in forum WOODWORK - Tools & MachineryReplies: 3Last Post: 7th May 2022, 10:02 PM -
N.S.W. Felder Silent power classic rip blade - Sydney
By Henrioliver in forum WOODWORK - Tools & MachineryReplies: 2Last Post: 7th May 2022, 04:13 PM -
Diamond Electroplate Saw Blade
By Bodgia in forum METALWORK FORUMReplies: 4Last Post: 14th July 2008, 08:06 AM
