Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
22nd January 2014, 07:04 AM #1
New Fence For A Secondhand Tablesaw
I've got an old Taiwanese TS (even got a sliding table that I'm slowly fettling. One of the issues with it is the 2mm bow in the rip fence. The clamping ends remove so I'll probably buy another piece of aluminium to replace the fence.
Any issues with using a piece of box steel instead?
Has anybody who has done this job (replaced just the fence and not buy a whole new assembly) got any tips?We don't know how lucky we are......
-
22nd January 2014 07:04 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd February 2014, 06:11 PM #2
Over 100 views, an nuffin? Not a peep?
So, nobody has ever replaced the fence (just the aluminium fence not the adjustment mechanism) on their tablesaw. Not ever?
And while I'm in a complaining mood, whatever happened to the 'edit' function on this forum? Because I will admit that the original post could benefit from a firm edit.
ooooh, I geddit, you can't edit the OP so you can't delete it.
We don't know how lucky we are......
-
2nd February 2014, 06:50 PM #3Senior Member
- Join Date
- Jun 2013
- Location
- Geelong
- Posts
- 427
Wouldn't have a clue but so you can have at least some food for thought, here goes.
aluminium square section tube has a defined corner/edge and would be best for a fence. Many people buy bigger bits to use as straight edges for paving building etc.
steel square section has what I refer to a pencil round edge and not necessarily straight.
this may even prompt responses from others
but this is my 2bobs
Similar Threads
-
Tablesaw fence - Left or right
By dazzler in forum HAND TOOLS - POWEREDReplies: 26Last Post: 3rd January 2017, 06:47 PM -
Micro adjuster for tablesaw fence
By Arron in forum TABLE SAWS & COMBINATIONSReplies: 2Last Post: 14th October 2012, 06:50 PM -
What tablesaw with what incra fence?
By doug3030 in forum INCRA JIGSReplies: 3Last Post: 17th June 2011, 01:47 PM -
Incra tablesaw fence
By Nature in forum INCRA JIGSReplies: 12Last Post: 9th April 2007, 01:46 AM