Thanks Thanks:  1
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. 25th May 2017, 10:13 AM #1
    bryn23
    bryn23 is offline Senior Member
    Join Date
    May 2009
    Location
    Peoples Republic of Bryn
    Posts
    393

    Default Hammer C3-31 Footprint Measurements

    Hi,

    Im currently making scale templates out of 3mm MDF for my workshop, i have already completed the N4400, A3-31 and AF16

    Just want to ask any of you out there with a C3-31 if you can run a tape over the width and length of the machine (excluding the slider) and also the just the width of the slider. i can work out the rest

    As it appears i may have to lean towards a full combo on wheels, due to space constraints after laying out the A3-31 with the N4400 and Dusty.

    I have the Felder Catalogue, but the dimensions for W1 and W2 are just the width and overall length with the various slider length.

    I'd plan on taking off the 1100mm table when not in use, to park my camper van in the shed, hence why i only need the slider width.

    Cheers,
    Reply With Quote Reply With Quote
  2. 25th May 2017 10:13 AM # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. 25th May 2017, 11:47 AM #2
    zvon
    zvon is offline Intermediate Member
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    36

    Default

    C3-31 Comfort SketchUp 2017 model is attached (fully dimensioned).

    Regards
    Zvon
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  4. 25th May 2017, 02:19 PM #3
    bryn23
    bryn23 is offline Senior Member
    Join Date
    May 2009
    Location
    Peoples Republic of Bryn
    Posts
    393

    Default

    Thanks Zvon,

    Im using sketch up 8, but it no longer allows imports, i did try your attached file, but it was empty. ( still keep it as the later unpaid versions took away the shadow lines from the sun path after 8, its a architectural drafting thing)

    But anyhow, I'm using real templates for my workshop, as well I've got heaps pf 3mm to get rid off and i prefer making scale templates for new projects, its something that tom taught me sand its stuck with me.

    if anyone has access to that skp, can you post the dimentions

    cheers
    Reply With Quote Reply With Quote
  5. 25th May 2017, 04:26 PM #4
    zvon
    zvon is offline Intermediate Member
    Join Date
    Aug 2008
    Location
    Perth
    Posts
    36

    Default

    Version 8 attached

    Regards
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  6. 25th May 2017, 04:47 PM #5
    bryn23
    bryn23 is offline Senior Member
    Join Date
    May 2009
    Location
    Peoples Republic of Bryn
    Posts
    393

    Default

    Zvon, you are legend

    i'll grab the dimension off it and make up a template when i get into the workshop tomorrow.

    It also works very well in my sketch up workshop drawing
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Chuck disassembly - unusual Jacobs on a Footprint 160A hand drill
    By Gunnaduit in forum HAND TOOLS - UNPOWERED
    Replies: 2
    Last Post: 15th March 2017, 05:04 AM
  2. Nova 1624-44 footprint
    By nz_carver in forum WOODTURNING - GENERAL
    Replies: 5
    Last Post: 17th February 2012, 05:32 PM
  3. Measurements
    By groeneaj in forum WOODWORK - GENERAL
    Replies: 8
    Last Post: 9th September 2010, 12:00 AM
  4. Footprint brand carving tools
    By matto1 in forum WOODCARVING AND SCULPTURE
    Replies: 3
    Last Post: 3rd September 2008, 10:05 AM
  5. Impact Hammer vs Rotary Hammer Drill
    By Burnsy in forum HAND TOOLS - POWERED
    Replies: 10
    Last Post: 17th October 2007, 12:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules