Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
2nd June 2019, 12:45 AM #1New Member
- Join Date
- Apr 2019
- Location
- wantirna victoria
- Posts
- 3
Help with removing Dewalt DWE7491-xe 10 inch saw blade
Hi to all. I purchased a Dewalt DWE7491-xe contractor table saw some months ago and i have found that the blade has a bit of a wobble in it, it's probably only half a mm but its enough to mark the timber that's put through it. Anyway the issue is i want to replace the blade but after removing the nut and washer i find i can't remove the blade due to the teeth hitting on part of the dust guard, I can get it to almost 5mm from the end but no further, it doesn't want to come straight out it needs to be angled in order to remove it due to the blade teeth catching on this dust guard. It looks like the blade was put on first and then the dust guard after.
Has anyone had similar issues and how did you finally remove it.
Thanks in advance for any help.
Regards
Pyrod
-
2nd June 2019 12:45 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd June 2019, 01:57 AM #2China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Sounds pretty simple take the guard off first
-
2nd June 2019, 09:54 AM #3
Have you got the blade all the way up?
https://www.manualslib.com/manual/87...?page=7#manualThose were the droids I was looking for.
https://autoblastgates.com.au
-
2nd June 2019, 12:14 PM #4New Member
- Join Date
- Apr 2019
- Location
- wantirna victoria
- Posts
- 3
Thanks NCArcher. Stupid me i didn't have the blade all the way up, I need to go see the optometrist and get these glasses replaced.
Old age makes you stupid sometimes!.
Regards
Pyrod
-
2nd June 2019, 02:44 PM #5
Similar Threads
-
Dewalt DWE7491-XE - Crank will turn freely upwards but blade will not rise
By barrysumpter in forum TABLE SAWS & COMBINATIONSReplies: 23Last Post: 16th April 2019, 08:43 AM -
Please help with blade teeth direction of Right Outer blade in Dewalt DW7670 Dado Set
By barrysumpter in forum TABLE SAWS & COMBINATIONSReplies: 11Last Post: 31st October 2018, 11:42 PM -
10 inch blade in a 9 1/4 inch power saw ... The WIP
By toddles in forum TRITON / GMCReplies: 4Last Post: 28th July 2007, 02:57 AM -
10 inch blade in a 9 1/4 inch power saw?
By toddles in forum TRITON / GMCReplies: 44Last Post: 2nd April 2007, 08:46 PM -
DeWalt 12 inch thicknesser. Dust collection.
By Robert WA in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 14th April 2003, 08:29 PM