Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2019
    Location
    ireland
    Posts
    2

    Default Shopmate Radial Arm Saw 5200 Type 4 rebuild

    Hi there,
    Thank you for the add. I have inherited a RAS Shopmate 5200T4. It is from the early 1980s and has sat for many years in an unheated and damp garage. That said it is is reasonable condition.
    I have removed the stand and have it built into a long workbench. There are a few adjustments that need made and it is fine for rough cutting etc.
    The problem is that the motor is noisy and I am sure that the thing needs a good clean out, adjustment, clean and lubrication. I have sourced new bushes for the motor but wanted to replace the bearings.
    I have the original manual which gives the part numbers of the bearings, but not the sizes.
    I could strip the machine down, remove the bearings and order new ones, but I dont want to be in a position of waiting several weeks for an odd sized bearing to be located.
    So..... has anyone replaced these bearings and if so, what are the dimensions of them or is there a more modern part number.
    The bearings I want to replace are the main armature assembly ones and the shaft assembly ones. The original part numbers are 10-00067 x2, 10-00068 and 10-00022.

    Thank you in advance.


    By the way I am located in Ireland so there is that too! Cant rotate the pic, sorry!

    saw.jpeg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2011
    Location
    Northern Beaches, Sydney
    Age
    63
    Posts
    307

    Default

    Your best bet is to take it apart and measure them if no-one else chimes in here with the correct sizes for those bearings. Use a micrometer. If you don't have one borrow or buy one. You'd be surprised how often you will use it. Order from someone like RS components and you'd have them in a week. I've ordered from them quite a few times for both cheap generic bearings and quality NSK as well as other parts.

    Stewie
    Last edited by Stewie D; 20th Apr 2019 at 01:34 PM. Reason: typo

Similar Threads

  1. Shopmate 5200 Radial Arm Saw (Type 4)
    By Midnight Man in forum MANUALS
    Replies: 0
    Last Post: 29th Jul 2017, 08:04 PM
  2. McGraw Edison shopmate 5200AT4 radial arm saw and router
    By barclay in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 5
    Last Post: 22nd Mar 2016, 07:17 PM
  3. Lost key for Black and Decker 1215 type B Radial Arm Saw
    By Box-maker in forum TABLE SAWS & COMBINATIONS
    Replies: 3
    Last Post: 27th Jun 2015, 01:59 PM
  4. Waldown Type 2M paint and rebuild as necessary
    By camoz in forum METALWORK FORUM
    Replies: 11
    Last Post: 28th Jan 2013, 02:40 PM
  5. Waldown Type 8SN Series III Rebuild
    By RayG in forum METALWORK FORUM
    Replies: 95
    Last Post: 25th Jan 2012, 05:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •