Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 18
Thread: New Table Saw
-
14th October 2008, 10:56 AM #1
New Table Saw
Picked up my new TS-10L 1PH yesterday arvo and spent the evening into the late hours assembling it
First impressions are that it is a very well made machine and I am a very happy chappy
Straight out of the box everything it could have been used as was but I went over it and spent a couple of hours fine tuning everything. The worst one out would have been the riving knife, leading edge was true with the back edge kicked out about 1.5mm.
Mitre slots is out by approximately 0.25mm of which I'll adjust when I have a better gauge set-up to measure it. Might pick this up at the show
Oh and it was dead easy for me to unload
Attachment 85869 Attachment 85870 Attachment 85871 Attachment 85872 Attachment 85873
Attachment 85874 Attachment 85875 Attachment 85876Cheers
DJ
ADMIN
-
14th October 2008 10:56 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th October 2008, 11:17 AM #2
-
14th October 2008, 11:47 AM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,795
-
14th October 2008, 01:07 PM #4
So you've made the progression from a turner to a real woodworker.
Nice healthy looking baby you've got there, looks like the delivery went well.
Now you've just gotta fire it up.
-
14th October 2008, 01:10 PM #5
-
14th October 2008, 01:11 PM #6
-
14th October 2008, 01:14 PM #7
Be careful if you make a zero clearance timber fence for the mitre gauge that the fence doesn't push the blade guard sideways rather than upwards.
My saw is very similar and I managed to push the guard sideways with the zero clearance fence and the blade ground into the side of the blade guard.
It's even easier to damage the guard when cutting on an angle. Initially the fence clears the guard. The guard is pushed upwards by the timber you are cutting but when the guard then drops back down it is pushed sideways by the fence.
Seems the only answer may be to have a shorter mitre gauge fence and dispense with the advantage of the zero clearance. A bit unfortunate!
-
14th October 2008, 01:14 PM #8
-
14th October 2008, 01:23 PM #9
-
14th October 2008, 07:44 PM #10
Looking good DJ, we may have to start a special TS10L forum
-
14th October 2008, 07:48 PM #11
Sweet, good score DJ
....................................................................
-
14th October 2008, 08:51 PM #12Senior Member
- Join Date
- Apr 2008
- Location
- Crows Nest, NSW
- Posts
- 111
I think you are partly responsible for a few folks buying these Big Shed... I picked my TS10L from Carbatec Sydney today. Will post some pics when its setup on the weekend
DJ - looking good mate That truck sure is the way to unload - there was a lot more muscle involved in mine today.
Cheers,
Geoff
-
14th October 2008, 10:50 PM #13Senior Member
- Join Date
- Apr 2008
- Location
- Brisbane QLD
- Age
- 57
- Posts
- 171
phoned about my order today. i also have a ts10l on order i was told it wouldnt be here till the end of Nov. i told them that i knew they had a delivery and people were getting there saws.
they phoned back hour latter telling me my saw was there. im bloody glad you guys posted about your saws, thanks
km
-
14th October 2008, 11:21 PM #14
-
17th October 2008, 09:17 PM #15
DJ that is a sweet saw mate, well done!
You can never have enough planes, that is why Mr Stanley invented the 1/2s
Similar Threads
-
dedicated table vs TSC-10HB 10" Table Saw option
By SilverSniper in forum ROUTING FORUMReplies: 2Last Post: 26th June 2008, 04:01 AM -
Saw Table/Extension Table compatability
By tomartyr in forum TRITON / GMCReplies: 4Last Post: 28th March 2008, 06:12 PM -
What's The Difference Between A Pool Table & Snooker Table & Billiard Table
By echnidna in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 47Last Post: 26th January 2007, 05:09 PM -
sliding table for Trupro table saw
By amgsir in forum TABLE SAWS & COMBINATIONSReplies: 0Last Post: 11th May 2005, 06:14 PM -
Fixing Table tops to Table Base
By Warrigal in forum WOODWORK - GENERALReplies: 6Last Post: 29th January 2002, 12:29 PM