Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 37
Thread: What TableSaw do you have?
-
10th March 2011, 10:04 PM #16"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
10th March 2011 10:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
10th March 2011, 10:08 PM #17
30+ year old masport. No gaurd, riving knife, tape on fence. Custom dust chute, sliding table. Takes full dado set, has tilting arbor.
Cost nothing, was part of a severance package from the cabinet maket for whom I worked.
RobertCheck my facebook:rhbtimber
-
10th March 2011, 10:53 PM #18
Luna W59. Absolutely the best table saw I've ever owned or used.
Cheers
Michael
-
11th March 2011, 10:23 AM #19
Hammer B3L. Saw / spindle combo
Pro's
Quite accurate.
Good rip capacity.
2400 sliding table
Spindle moulder
Quiet machine
Got it for the right price at auction.
Cons
Bit big for the shed, but that is the sheds fault.
Can't think of any others
CheersThere ain't no devil, it's just god when he's drunk!!
Tom Waits
-
11th March 2011, 05:01 PM #20Senior Member
- Join Date
- Jul 2010
- Location
- Adelaide
- Age
- 42
- Posts
- 271
-
16th March 2011, 10:28 AM #21
Carbatec TS10-L
Pro's
-Powerful
-Accurate
-Excellent build quality
-Could be found for sub $2000
Con's
-Not imported by Carbatec anymore and Jet Xacta Saw Deluxe (clone) also not brought to Aus.
I still think there's a market (small but one none the less) for a quality saw between the upper end chinese and taiwanese imports and the powermatic, saw stop. When I was looking to upgrade my Triton workcentre I was willing to make a decent investment but couldn't stretch to the powermatic. Saw stop hadn't arrived yet either. Looking around I was disappointed with the available offerings and was tossing up a Jet saw stop or just keeping the triton when I came across the TS10-L. Never looked back!
-
16th March 2011, 09:10 PM #22SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Perth
- Age
- 50
- Posts
- 728
Anyone know why Carbatec don't import anymore?
-
16th March 2011, 09:30 PM #23Senior Member
- Join Date
- Jul 2010
- Location
- Adelaide
- Age
- 42
- Posts
- 271
-
18th March 2011, 09:06 AM #24Senior Member
- Join Date
- Apr 2007
- Location
- Upper Ferntree Gully
- Posts
- 194
Now I have a Carbatec TS-12R 3 phase with all the options (including the sliding table)
-
20th March 2011, 09:49 AM #25
I bought a Powermatic PM2000 when they will still "only" $3500
Dust collection is not as good as I expected from below the table given that it has a blade shroud. However, I am doing some experiments to close the huge gap around the blade to see if that will help.
Wheels work as advertised.
The standard riving knife blade guard setup is surprisingly good. I did buy an overhead guard and low profile knife but that was more for convenience sake.
The standard fence is ROCK solid. Another vote for the Wixey fence. Money well spent. I just wish there was a micro adjustment feature for the fence. The fist bump method gets old.
-
17th July 2011, 09:36 PM #26
Other end of the scale.
Powercraft PTS1500.
Features.
1500watt motor. 10 inch blade. Riving knife. Dust extractor hose.
Wheels on stand so able to be moved around.
Okay so sure it's not Pro quality but I checked the table with a striaght edge and it's flat. The depth and angle settings on the blade are accurate against my square, it's got an overload circuit breaker and blade brake.
The fence stays locked in place but could have a better lock system.
Has extension tables on 3 sides.
I wont be giving it a lot of work so for what I paid for it should be fine.
-
17th July 2011, 10:27 PM #27Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Altendorf WA80 full size panel saw.
30mm arbor, 7.5hp main motor, 1hp scriber motor, table has 3.8m of usable travel, 1.3m rip capacity, outrigger table stop extends to 3.2m. Will take a 16" blade. Power blade rise/fall and tilt with digital display of blade angle.
Pros: extremely smooth and powerful, 5" depth of cut, repeatable accuracy to .5mm, breaking down full sheets is quick and easy, can joint solid timber up to 125mm thick and 3.6m long in one pass.
Cons: Needs lots of space and $20k+
Gotta love good old "mines-bigger-than-yours"
-
18th July 2011, 10:56 PM #28
Hammer B3 winner saw/spindle combo....
pros
30mm arbour
4kw motors (saw and spindle)
blade tilt with 90 and 45° stops
2.5m sliding table
crosscut outrigger
fence can be easilly slid back and forth also swaps from a tall fence to a low fence
can rip 1200 wide with extension
spanner and allen key to undo blade (right hand thread)
electric braking on saw and spindle
cons
the saw guard is a pain, attaches to splitter so has to be removed to do submerged cuts
fence moves when tightening locking handle
~12k new
Compared to the old Durden 50s pacemaker it's a vastly better machine to use but has needed a few refinements
not sure I'd go a combo machine again I like to set up and leave setup and not have to dismantle a setup just to use the saw next
Pete
-
23rd July 2011, 05:26 PM #29Novice
- Join Date
- Apr 2011
- Location
- Brisbane (Manly West)
- Posts
- 18
Which Table Saw
A Scheppach TS4010 3ph 5hp 12" (305mm) 30mm arbour
Pros - Well made - Accurate, smooth and I can fold the extension table up and roll it all away to the storage bays in the back of the shed. Standard blade was excellent until some keith (not me) sharpened it the wrong way. Also has a sliding table which can be detached when put away.
Cons - Not a lot of service and table does not have a standard 3/4 mitre gauge groove - frustrating. Also because of electric brake - it will not accept stacked daddow blades I am informed.
If anyone knows where I can get a scribing blade kit for it I would be much appreciated.
-
24th July 2011, 03:58 PM #30SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 49
- Posts
- 591
i have a festool cms-ge ts-75.
it takes a 210mm blade with 2.6mm kerf and 30mm arbour
it is light, precise and too bloody expensive!
but it serves my needs perfectly for onsite construction work.
justin.
Similar Threads
-
want to buy a tablesaw
By mac_man_luke in forum TABLE SAWS & COMBINATIONSReplies: 10Last Post: 18th February 2009, 07:28 AM -
Which tablesaw?
By blackheart in forum TABLE SAWS & COMBINATIONSReplies: 5Last Post: 28th August 2007, 06:23 PM -
TS-12R Tablesaw.
By Stirlo in forum HAND TOOLS - POWEREDReplies: 7Last Post: 17th May 2006, 10:01 AM -
Which Tablesaw again
By Cagey in forum HAND TOOLS - POWEREDReplies: 28Last Post: 4th June 2005, 11:28 AM -
ATS Tablesaw
By Outsider in forum HAND TOOLS - POWEREDReplies: 6Last Post: 19th May 2005, 10:47 AM