Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Tablesaw Combo brand id needed
-
11th January 2024, 02:37 PM #1Senior Member
- Join Date
- Oct 2010
- Location
- Victoria, Australia
- Posts
- 140
Tablesaw Combo brand id needed
Hi,
Friend of mine has a tablesaw with planer/thicknesser on one side, and a sanding disc attachment on the other. He is having problems with the thicknesser. He has the feed roller adjusted up so much it leaves deep marks in the timber yet the cutter blades don't touch the timber. He has adjusted the blades out as much as he dares to but they still don't touch the timber while the feed roller is in contact with the timber. They blades and the feed roller are original.
Something is clearly out of whack, and I thought a user manual might offer clues on proper adjustment of the blades, but unfortunately there is no brand name or model number anywhere on the machine. Can anyone identify it from the photos below please?
IMG_20240111_130631996_HDR.jpgIMG_20240111_130702304_HDR.jpgIMG_20240111_130818115.jpg
My apologies for the pic's sideways orientation. They were the right way round when I uploaded them.
-
11th January 2024 02:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th January 2024, 07:33 PM #2Senior Member
- Join Date
- Jun 2010
- Location
- Wimmera
- Posts
- 174
Looking at the ourigger of the sand disc table and the round bar the saw fence slides on makes me think it is an Artisan.
John
-
12th January 2024, 05:55 PM #3Senior Member
- Join Date
- Oct 2010
- Location
- Victoria, Australia
- Posts
- 140
-
12th January 2024, 07:43 PM #4Senior Member
- Join Date
- Jun 2010
- Location
- Wimmera
- Posts
- 174
Yes. There were a lot about the industry. Father owned the one I inherited and my son now has it.
Good solid machine.
John
Similar Threads
-
SOUTH AUST SCM Combo jointer planer brand new FS41CX1
By hurcorh in forum WOODWORK - Tools & MachineryReplies: 5Last Post: 22nd May 2023, 08:14 PM -
Advice needed: angled rip without a tablesaw
By chriskat in forum WOODWORK - GENERALReplies: 9Last Post: 30th May 2014, 10:07 AM -
Guard needed for 10HB tablesaw
By Dengue in forum TABLE SAWS & COMBINATIONSReplies: 2Last Post: 21st February 2013, 11:01 PM -
bandsaw/tablesaw combo bench
By turrrdle in forum WOODWORK - GENERALReplies: 9Last Post: 11th December 2011, 03:09 PM -
Which tablesaw blades needed?
By Dengue in forum WOODWORK - GENERALReplies: 11Last Post: 28th May 2009, 07:25 PM