Thread: My latest toy.

Hooked up the machine today, was thinking it's hard to operate or need to spend sometime adjusting it but it was calibrated quite accurately by the previous owner and the video is the second cut I've made with the saw.

The blade diameter is 355mm, cut capacity is 165mm wide by 108mm deep

Very handy machine to have, no more manual holding onto stock while pushing the carriage or pulling the lever, no more manual handling/swing of the stock. No more need for long mitre roller table, although the bed length is at 4.5m, it's a beast itself.
still need to hookup the ducting though, the duct size is 80mm. Odd size but am sure will come over this somehow.