Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
22nd July 2012, 02:03 PM #1Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
Wiring motor on Toolex 250mm table saw
hi all.....I`ve just got a new Toolex 250mm table saw.....and the motor needs wiring up. There are three wires coming from the switch and I know what they are but where to connect them....hmmmm. I know where the earth goes anyway so thats a start. Mr. Toolex has not indicated on the connection area just what goes where. No info ( or book, pamphlet etc) came with saw. I am assuming that I just connect it up and if it runs the right way then you beauty........any help appreciated. cheers, Graeme.
-
22nd July 2012 02:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd July 2012, 04:07 PM #2Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 1,007
When it comes to 240V AC, if you don't know where things go, and you have no way of figuring it out, It is time to call your local qualified sparky.
It won't cost much and you and your family will be safe.____________________________________________________________
there are only 10 types of people in the world. Those that understand binary arithmetic and those that don't.
-
22nd July 2012, 04:52 PM #3
-
22nd July 2012, 06:35 PM #4DISCLAIMER
No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.
WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk
Groggy
Forums Moderator
-
22nd July 2012, 09:32 PM #5Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
I sort of figured that guys but thanks anyway. I`m just peed off that a manual of sorts didn`t come with the saw. I`ll get some sparky advice.
-
23rd July 2012, 08:50 AM #6
Did you buy it new? I'd be hassling the store if that were the case.....
-
23rd July 2012, 08:44 PM #7Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
yes, thats what it is...brand new. I`m going to talk to a lekko tomorrow about where the active and neutral connect to. thanks all.
Similar Threads
-
Wiring a GMF 8" grinder motor
By colhu in forum GENERAL & SMALL MACHINERYReplies: 11Last Post: 13th October 2021, 07:48 PM -
Star/Delta motor wiring
By .RC. in forum METALWORK FORUMReplies: 33Last Post: 3rd March 2012, 11:01 PM -
Wiring of a single phase motor.
By krisfarm in forum METALWORK FORUMReplies: 27Last Post: 28th October 2010, 08:10 PM -
motor wiring diagram
By .RC. in forum METALWORK FORUMReplies: 2Last Post: 12th July 2010, 07:37 PM