Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: A3-31 Hammer Manual
-
2nd October 2018, 01:04 PM #1GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
A3-31 Hammer Manual
I am putting this here for future reference for anyone who finds it necessary to adjust the tables on one of these machines
a331 - adjustment guide | Felder Upload
This document would also apply to a C3 combination machine.CHRIS
-
2nd October 2018 01:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th October 2018, 08:44 PM #2
So you have had to do this recently? Did you have an adequate straight edge?
i had to do my little old school jointer the other day after belting the bejesus out of the outfeed with a lump of stick. Luckily I had, some years ago acquired a 2metre straight edge that is straight to 34 microns over its length.
cheers
BThere ain't no devil, it's just god when he's drunk!!
Tom Waits
-
5th October 2018, 12:04 AM #3GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
No, I have never had any issues with mine. As far as I know this document was put together by Felder US and it only surfaced after a new customer had problems with their just purchased machine. Prior to that there was only some minor technical measurements with no real explanation of how to adjust the machine to get those figures.
CHRIS
Similar Threads
-
Manual for a Yellow Woodfast C1000 Model 2 (manual speed change)
By Xanthorrhoeas in forum WOODTURNING - GENERALReplies: 11Last Post: 6th September 2016, 10:13 AM -
Hammer C3 31 -Must tell Someone!
By Big Bubba in forum TABLE SAWS & COMBINATIONSReplies: 33Last Post: 2nd September 2016, 08:20 PM -
Hammer C3 31 Looking to buy
By Dov in forum TABLE SAWS & COMBINATIONSReplies: 19Last Post: 17th September 2010, 10:02 PM -
Hammer c3-31
By Poppa in forum TABLE SAWS & COMBINATIONSReplies: 11Last Post: 28th January 2010, 06:12 PM -
Impact Hammer vs Rotary Hammer Drill
By Burnsy in forum HAND TOOLS - POWEREDReplies: 10Last Post: 17th October 2007, 12:22 AM