Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2012
    Location
    UK
    Posts
    1

    Default Craftsman 10 inch radial saw part needed - Help

    Hi, I have an old (1978?) 10 inch Craftsman radial arm saw which until today was working great. Unfortunately the saw jammed in a bit of hard wood and broke one Carriage Bearing (part number 63117). Can anyone help me locate one or more of these bearings. I can arrange shipment to the UK so this need not be a problem. I will be completely lost without this saw and if I cannot get a replacement bearing I might have to buy a new saw (OUCH!!!). Thanks for any help you can give me.

    Brian

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2010
    Location
    Lebrina
    Posts
    1,099

    Default

    Quote Originally Posted by ashnook View Post
    Hi, I have an old (1978?) 10 inch Craftsman radial arm saw which until today was working great. Unfortunately the saw jammed in a bit of hard wood and broke one Carriage Bearing (part number 63117). Can anyone help me locate one or more of these bearings. I can arrange shipment to the UK so this need not be a problem. I will be completely lost without this saw and if I cannot get a replacement bearing I might have to buy a new saw (OUCH!!!). Thanks for any help you can give me.

    Brian
    Can you post a picture of the bearing?
    Often a generic part can be used or at least made to work.

  4. #3
    Join Date
    Sep 2011
    Location
    Northern Beaches, Sydney
    Age
    68
    Posts
    329

    Default

    If you know all the sizes - OD, ID and thickness then you should be able to track down a replacement pretty quickly at any local industrial supply company in the UK.
    Just make sure to use a good brand.

    Stewie

  5. #4
    Join Date
    Sep 2011
    Location
    kallangur qld
    Posts
    1,074

    Default

    Take the broken bearing to your local bearing & belt supplier, they will have a generis replacement , use sealed bearings , NOT shielded.

    Jeff
    vk4

Similar Threads

  1. Waldown radial drill - parts needed.
    By richo132 in forum METALWORK FORUM
    Replies: 38
    Last Post: 28th February 2012, 06:30 PM
  2. Replies: 10
    Last Post: 31st August 2009, 01:29 PM
  3. Bent spindle on craftsman lathe, its a discountinued part
    By dirk1609 in forum WOODTURNING - GENERAL
    Replies: 14
    Last Post: 19th May 2009, 02:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •