Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
-
31st October 2015, 10:24 PM #1Member
- Join Date
- Aug 2008
- Location
- Brisbane
- Posts
- 89
FAO Felder and Hammer Silent Power users
// Reprise! //
Will be back in Stock from Monday/Tuesday.
Thanks
-
31st October 2015 10:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st October 2015, 10:57 PM #2
Well Steve, I tried to purchase a dozen via your link, using Paypal, and I received this reply:
- The product selection cannot be delivered by the available carrier(s): it is too heavy. Please amend your cart to lower its weight.
Regards from Perth
Derek
p.s. the 1/4" carbide up cut router bit is terrific!Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
1st November 2015, 01:17 AM #3Member
- Join Date
- Aug 2008
- Location
- Brisbane
- Posts
- 89
Hi Derek,
Your State was missing from your address - the site uses your State to calculate the shipping so if its not there you will get that error - I've corrected your address so all should be good now.
Cheers
Steve
-
1st November 2015, 05:09 AM #4
All done. Thanks.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
1st November 2015, 01:02 PM #5GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,041
-
1st November 2015, 02:25 PM #6
Hi Steve
I will take 45 of them please - will do it on your website as soon as i can confirm that 45 is a full set (perhaps you could reserve them for me please?).
Don't despair about not selling many of these yet, as there are two reasons why they haven't moved much:
1. Machines that take them are only two years old or less
2. They are ridiculously durable and tough
I'm still on my first edge. They were pretty much ready for turning a while ago, but I had some recycled timber jobs to do, with a great threat of nails that I had missed, and PLENTY of staple legs. I have buzzed over staples in the hundreds, and nails in the scores, and I STILL get a reasonable surface (but not as good as new edges.
In other words, I abused them at the end of the edge life, but they won't give in. Unbelievable.
-
1st November 2015, 06:16 PM #7
Just as well I counted again. There's 47 - what a very odd number that is.
Have ordered through the site.
-
29th June 2016, 09:17 PM #8Member
- Join Date
- Aug 2008
- Location
- Brisbane
- Posts
- 89
A quick return - nearly 8 months on and following a request for a full set . . . I will be stocking these inserts again from next week!
-
30th June 2016, 06:57 AM #9
Hi Steve, I can't see a link for this.?
PeterThe time we enjoy wasting is not wasted time.
-
30th June 2016, 07:54 AM #10Member
- Join Date
- Aug 2008
- Location
- Brisbane
- Posts
- 89
Hi Peter,
I've not put them back on my site (SJE-Tool) just yet - I will do that once they arrive.
Cheers
Steve
-
30th June 2016, 09:09 AM #11GOLD MEMBER
- Join Date
- Nov 2011
- Location
- Sutherland Shire, Sydney
- Age
- 71
- Posts
- 1,301
AS Pauline once said "Please explain"
Am I missing something here, or has something been deleted in the first post?
Just curious.
Alan...
-
30th June 2016, 09:41 AM #12Member
- Join Date
- Aug 2008
- Location
- Brisbane
- Posts
- 89
Hi Alan,
I edited the original post to a //Reprise// as I have just bumped the original thread when I started to stock them - but since the original post was referring to me originally stocking the inserts I didn't feel it was relative.
In summary:
As of Monday/Tuesday I will have the inserts for the Hammer/Felder (A3-31) with Silent Power head back in stock . . .
Everyone clear?
Cheers
Steve
-
30th June 2016, 09:49 AM #13GOLD MEMBER
- Join Date
- Nov 2011
- Location
- Sutherland Shire, Sydney
- Age
- 71
- Posts
- 1,301
Ah! now I see. At first I thought it might have been an 'in joke', and I was well and truly on the outer.
Thanks Steve,
Alan...
-
8th July 2016, 07:35 PM #14Member
- Join Date
- Aug 2008
- Location
- Brisbane
- Posts
- 89
Well they have finally made there way to me . . . bit a kerfuffle with FedEx along with the factory for some reason mis-spelling my address! /
Anyway they are in stock:
Hammer Felder A3 31 Silent Power spiral head thicknesser carbide inserts
Similar Threads
-
Felder Hammer Range
By hereward in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 7Last Post: 22nd October 2010, 10:20 AM -
hammer or felder
By Mick72 in forum BANDSAWSReplies: 6Last Post: 3rd September 2009, 09:26 PM -
Felder vs Hammer
By Colin Howkins in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 10Last Post: 28th February 2008, 06:20 AM -
used felder, minimax or hammer?
By currawong in forum TABLE SAWS & COMBINATIONSReplies: 3Last Post: 23rd January 2008, 09:06 AM -
Hammer N4400 BS - Q for Felder
By Zed in forum TABLE SAWS & COMBINATIONSReplies: 10Last Post: 26th September 2006, 11:15 AM