Thread: FAO Felder and Hammer Silent Power users

Well Steve, I tried to purchase a dozen via your link, using Paypal, and I received this reply:

1. The product selection cannot be delivered by the available carrier(s): it is too heavy. Please amend your cart to lower its weight.

Suggestion?

Regards from Perth

Derek

p.s. the 1/4" carbide up cut router bit is terrific!

Hi Derek,
Your State was missing from your address - the site uses your State to calculate the shipping so if its not there you will get that error - I've corrected your address so all should be good now.

Cheers

Steve

All done. Thanks.

Regards from Perth

Derek

Originally Posted by derekcohen

p.s. the 1/4" carbide up cut router bit is terrific!

Hi Derek,
You actually bought that off me. Glad you're happy with it.
Cheers,
David

Hi Steve

I will take 45 of them please - will do it on your website as soon as i can confirm that 45 is a full set (perhaps you could reserve them for me please?).

Don't despair about not selling many of these yet, as there are two reasons why they haven't moved much:
1. Machines that take them are only two years old or less
2. They are ridiculously durable and tough

I'm still on my first edge. They were pretty much ready for turning a while ago, but I had some recycled timber jobs to do, with a great threat of nails that I had missed, and PLENTY of staple legs. I have buzzed over staples in the hundreds, and nails in the scores, and I STILL get a reasonable surface (but not as good as new edges.

In other words, I abused them at the end of the edge life, but they won't give in. Unbelievable.

Just as well I counted again. There's 47 - what a very odd number that is.

Have ordered through the site.

A quick return - nearly 8 months on and following a request for a full set . . . I will be stocking these inserts again from next week!

Hi Steve, I can't see a link for this.?

Peter

Hi Peter,

I've not put them back on my site (SJE-Tool) just yet - I will do that once they arrive.

Cheers

Steve

AS Pauline once said "Please explain"
Am I missing something here, or has something been deleted in the first post?

Just curious.

Alan...

Hi Alan,
I edited the original post to a //Reprise// as I have just bumped the original thread when I started to stock them - but since the original post was referring to me originally stocking the inserts I didn't feel it was relative.

In summary:

As of Monday/Tuesday I will have the inserts for the Hammer/Felder (A3-31) with Silent Power head back in stock . . .

Everyone clear?

Cheers

Steve

Ah! now I see. At first I thought it might have been an 'in joke', and I was well and truly on the outer.

Thanks Steve,

Alan...

Well they have finally made there way to me . . . bit a kerfuffle with FedEx along with the factory for some reason mis-spelling my address! /

Anyway they are in stock:
Hammer Felder A3 31 Silent Power spiral head thicknesser carbide inserts