Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
6th January 2024, 03:41 PM #1Member
- Join Date
- Dec 2014
- Location
- Perth
- Posts
- 99
A few fence issues with Rikon 6” benchtop jointer
Okay, my technique leaves a lot to be desired, and I am working on that, but when I edge joint the Aluminium fence with its ribbed construction makes it very hard to see if the face of the board is flush with it. It might be possible to put a flat MDF fence on the front to get rid of the false shadows, but I would be interested in anybody else's experience.
regards
-
6th January 2024 03:41 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th January 2024, 01:09 PM #2
Its a case of feeling the wood is in contact with the fence rather than seeing. When jointing an edge you concentrate on keeping contact with the fence more than pressing down. Practice a bit. I guess a bit of board attached to the fence could help stiffen up an aloy fence but you will then loose some of the 6'' width. Melamine or form ply are both slick surfaced.
Regards
John
-
7th January 2024, 10:53 PM #3Member
- Join Date
- Dec 2014
- Location
- Perth
- Posts
- 99
Thanks for that.
A lot more practice needed I think.
regards
Similar Threads
-
SOLD: Benchtop Jointer/Planner, Benchtop Router & Stand and Gifkins Dovetail Jig
By Mulgabill in forum WOODWORK - Tools & MachineryReplies: 16Last Post: 6th September 2022, 08:10 PM -
New Rikon jointer/thicknesser combo coming
By Packdaddy in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 3rd September 2021, 12:28 AM -
New jointer. Carbatec vs Rikon vs Woodfast
By mickgallagher in forum WOODWORK - GENERALReplies: 8Last Post: 7th August 2020, 01:01 PM -
User Info on Rikon 20-108H Jointer
By Splintersagain in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 7th March 2019, 07:03 PM -
Ironbark benchtop finishing issues
By obelisk8 in forum FINISHINGReplies: 7Last Post: 5th March 2011, 11:52 PM