Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Jointer Buzzer issue help please
-
19th June 2008, 08:55 PM #1
Jointer Buzzer issue help please
Hi all
I am giving my old but new buzzer a clean up and have a couple of questions
1 Is there a lube or grease out there i can use to lubricate the tables in their rails that wont attract dust and eventually jam up the working parts? Or am i better not to lube at all.
2 I am trying to remove the knives to get them honed before use. But im having no luck trying to shift the nut? holding them in. Is it likely to be a nut? They have been bathed several times in WD40. the material the nut is made from seems very soft and im rounding them over when I apply any force am i missing something here."All that is necessary for evil to succeed is for good men to do nothing"
(Edmund Burke 1729-1797)
-
19th June 2008 08:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th June 2008, 10:02 PM #2
gib screws that hold your blade in need to be screwed in to loosen the blade you also need a close fitting spanner. sometimes you may need to cut the head off particularly stubborn gib screw and replaced. got the lubricant we use on the tip of my tongue just can't think of it right now sorry
-
19th June 2008, 10:08 PM #3
inox
-
19th June 2008, 10:12 PM #4
G'day Kiwi,
To remove the blades as Canetoad said you have to screw the gib screws in - that is with the spanner on the screw head turn the spanner towards the vee belt pulley.
Similar Threads
-
jointer/buzzer HP
By tikiland in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 5Last Post: 18th September 2007, 08:45 PM -
The best buzzer...I mean joiner
By martink in forum HAND TOOLS - POWEREDReplies: 17Last Post: 7th April 2006, 11:10 AM -
Buzzer / Thicknesser set up
By Aids in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 11th October 2005, 10:36 PM -
Buzzer or Jointer
By Asquared in forum HAND TOOLS - POWEREDReplies: 1Last Post: 26th August 1999, 08:10 AM