Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
5th May 2018, 03:46 PM #1Senior Member
- Join Date
- Feb 2014
- Location
- Bne
- Posts
- 383
Locating pins on thicknesser cutterhead
Hi everyone, my circa 1994 Benchtop thicknesser has died this morning quite a horrible death I might add. Smoke, leaking some sort of fluid and sparks.
Well I like the aftermarket Italian blades that I purchase from my sharpening service. Thet are a straight blade with no locating holes in them.
I have noticed that a lot of the more recent mahines have some sort of locating pins on the cutterhead where the blades are aligned.
I don't want this as i set mine with a jig and the Italian blades would not be able to be used.
Are the locating pins/grub screws able to be removed or are they pressed in or manufactured with the pins in place?
For a reference I am looking at the Chinese MB 1931, in this case one manufactured for Tradetools.
https://www.tradetools.com/product-range/power-tools/stationary-power-tools/renegade-12-1-2-planer-thicknesser-1500w-2hp-3mm-cut
Kind regards TonyLast edited by tomartomau; 5th May 2018 at 03:47 PM. Reason: Adding text
-
5th May 2018 03:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th May 2018, 04:32 PM #2China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Why just replace the capacitor on the one you have
-
5th May 2018, 06:24 PM #3Senior Member
- Join Date
- Feb 2014
- Location
- Bne
- Posts
- 383
Good point. I will have a look
-
5th June 2019, 10:01 PM #4New Member
- Join Date
- Jun 2019
- Location
- Rockhampton
- Posts
- 1
Tomartomau - did you end up buying the Renegade thicknesser?
Similar Threads
-
Retrofitting CTS spiral cutterhead to Carbatec CTJ-680 15" thicknesser
By doug3030 in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 19Last Post: 25th September 2015, 04:48 PM -
Old Wolfenden 24" thicknesser with square 4 blade cutterhead?????
By hugh reid2 in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 6th June 2014, 10:29 AM -
Upgraded cutterhead for Durden Thicknesser
By ssellar in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 2Last Post: 3rd April 2011, 05:42 PM