Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
24th July 2017, 10:37 AM #1Member
- Join Date
- Jun 2015
- Location
- Brisbane
- Posts
- 65
Plastic Gear on Planer Thicknesser?
My Woodman planer thicknesser (PT310HH) which is the same as the Jet JPT310 HH has been stalling the wood feed when in thicknesser mode. It would feed in ok and then the feed roller would stop turning and the wood required a bit of a push to get going again. This was not due to excessive thickness being removed.
On investigation I've found there is a plastic cam wheel that has a few teeth worn down in one patch that is causing the problem (see attached photos).
My question is;- Has anyone else had this problem and can the plastic gear be replaced with something a bit more robust (or is it plastic for a reason)?
Cheers
Mike
-
24th July 2017 10:37 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Jet JPT 10B Planer/Thicknesser
By Colin62 in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 30th June 2014, 01:06 AM -
Which Planer/ Thicknesser
By Dwano in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 3Last Post: 31st January 2013, 11:46 PM -
Here we go again, which planer/thicknesser to get.
By codeMunk3y in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 9Last Post: 24th May 2012, 09:37 PM -
Planer / Thicknesser.
By ydna001 in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 6Last Post: 20th August 2008, 10:10 PM -
Thicknesser or Planer Thicknesser (Jointer)
By Markw in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 5Last Post: 9th November 2006, 01:58 PM