Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 25
Thread: New spindle moulder on its way
-
6th July 2020, 01:32 PM #1SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
New spindle moulder on its way
New Spinlde moulder on its way, put my 20% deposit downtoday.
It is a SCM TI145 EP, fully spec’ed model with electrospindle,LCD display and side tenon table.
It was not hard to decide between SCM or Felder spindle moulder
Because Felder did not offer the tenon table on the side oftheir spindle moulder lineup, and this is non-negotiable for me cos my workshop arrangement.
I have good experience with both Felder and SCM machines.
SCM is my preferred machines.
SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
6th July 2020 01:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th July 2020, 03:39 PM #2Senior Member
- Join Date
- Feb 2012
- Location
- Newcastle
- Posts
- 337
So is the sliding table on the end for tenoning rather than having a sliding table on the front? I guess it means you only need working space in line with the machine and not perpendicular to it?
-
10th July 2020, 01:17 PM #3SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
Yes, that is exactly right. Its easier to find a long rectangular work space (side mounted sliding table) than a square work space (sliding table on the front) in my workshop, or in any workshop, so to speak.
I am very excited about my new spindle moulder, in the past I havnt use my SM much because the setup of it is a pain and you need to do another job with another cutter and you need to spend time to set it up again for another job. You spend more time setting up the machine than the actual moulding process.
With this new SM, you press a few buttons, the fences, spindle height and tilts to the preset/saved settingSCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
10th July 2020, 08:49 PM #4
A machine that best fits your needs as in the layout in your workshop is evidently paramount in your decision Albert .Look forward to hearing more when you have it in place.
Johnno
Everyone has a photographic memory, some just don't have film.
-
11th July 2020, 02:07 PM #5Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,471
Lovely bit of kit. Do you have a power feed to use with it?
-
11th July 2020, 06:49 PM #6SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
yes, I’ve recently bought a Comatic variable speed feeder. SCM charges 2000 EURO for a feeder arm for this machine. Because of this cost I wanted to use my own but due to the setup of the machine I have to buy their feeder support - the feeder support is part of the control panel.
SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
14th July 2020, 01:51 AM #7Intermediate Member
- Join Date
- Jul 2020
- Location
- Österbotten Finland
- Age
- 42
- Posts
- 27
Now that looks like a mighty fine spindle moulder.
I have the grandfather of that machine. A late 1960-ies T160. Nothing beats a top quality full size spindle moulder.
-
15th July 2020, 11:18 AM #8SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
16th August 2020, 04:41 PM #9Novice
- Join Date
- Jun 2017
- Location
- auckland
- Age
- 49
- Posts
- 21
Push button setup. So jealous!
Sent from my iPhone using Tapatalk
-
16th August 2020, 05:28 PM #10
Albert, I agree with your set up time issue. Today I had to mould a picture rail for home. 2 separate operations, 1/2 hour set up 2 minutes to do the job. Granted I am only a hobbiest, but time is money and I can appreciate the need for quicker set up for the professionals.
Pat
Work is a necessary evil to be avoided. Mark Twain
-
17th August 2020, 09:13 AM #11SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
-
17th August 2020, 09:22 AM #12SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 999
Yes. Setup time for spindle moulder takes most of the time... I had to do the same yesterday for 1 tenon job but the SM was setup for profiling.
I finally got around to play with the CMT knives and the feeder yesterday. glued up a panel. Say good bye to Domino for alignment or Frontline clamps.
I cant imagine working with SM without a power feeder.
117578597_10157994048078813_1116729111914111400_n.jpg117807024_10157994048403813_2584669833719701549_n.jpg117715738_10157994048458813_7855676539711698880_n.jpg117717683_10157994048598813_5060784822717700969_n.jpgSCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
17th August 2020, 12:19 PM #13Senior Member
- Join Date
- Feb 2012
- Location
- Newcastle
- Posts
- 337
I'm surprised, I would have thought even with that glue profile you'd still want something like frontline clamps to stop the panel cupping from any uneven clamp pressure...or do you have a fancy panel clamp setup?
-
17th August 2020, 01:55 PM #14Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
-
17th August 2020, 10:43 PM #15
Similar Threads
-
SWAP ANYWHERE: 240v 3hp spindle moulder (30mm dia. tilting spindle)
By woodchopper in forum SWAP OR FREEReplies: 5Last Post: 13th July 2019, 04:53 PM -
QUEENSLAND 240v 3HP Spindle Moulder (30mm dia tilting spindle)
By woodchopper in forum WOODWORK - Tools & MachineryReplies: 0Last Post: 6th July 2019, 09:42 AM -
FREE: QLD 240v 3hp Spindle Moulder (30mm dia. Tilting Spindle)
By woodchopper in forum SWAP OR FREEReplies: 1Last Post: 5th July 2019, 08:22 AM -
Spindle moulder or Planer/moulder
By HaydnG in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 8Last Post: 19th May 2006, 11:23 PM