Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 24
-
7th December 2023, 11:30 PM #1Senior Member
- Join Date
- Nov 2017
- Location
- Melbourne
- Age
- 73
- Posts
- 358
Be cautious buying supposedly demo machines marked down
Finally got around to using a thicknesser I bought earlier this year from a major retailer of woodworking and other machinery. Supposedly a demo machine and marked down a couple of hundred bucks which was about a 25% discount. I went there to buy something else but noticed this apparent bargain on display.
What surprised and disappointed me on finally using it was that putting timber through it showed that one insert was missing and another was damaged. The damaged one must have hit metal or something else much harder than timber to damage it, which seems unlikely to have been done on a demonstration machine in the dealer's shop.
I suspect it was a sold return.
After allowing for the cost of a couple of inserts and half an hour or so identifying and fixing the problems I'm still well ahead in dollars, but I'm also unhappy that what I think was a used and damaged returned machine was passed off as demo. Not least because I don't know what has been stressed on the machine that I wouldn't expect to happen during demos by a retailer and which might shorten its life. If I'd had the sense to see it demonstrated and seen the faults, rather than being a trusting idiot relying upon the seller's statements, I wouldn't have bought it.
Next time I'll get the seller to demo the machine for me to confirm that, as one expects with a demo machine, it works as one expects a new and barely used machine to work.
-
7th December 2023 11:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
8th December 2023, 08:06 AM #2GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 2,645
-
8th December 2023, 08:10 AM #3
It’s possible the dealer may not have known of the damage when it was returned.
-
8th December 2023, 08:16 AM #4GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 2,645
If I'm reading the original post correctly, it was sold as an ex-demo machine, not a return.
-
8th December 2023, 08:29 AM #5
Under Australian Consumer Law you have specific rights, particularly wrt the representations made by a retailer. Repair, replace, refund, cancel | ACCC
If it was a returned machine and not a demo as represented you may have recourse to a full refund.
As a demo machine the retailer should have replaced the inserts for you for free as the machine must be in a fully operational state at the time of sale! look up "consumer guarantees."
If the machine was sold "as is" then it most likely was not a demo machine.
Of course you only have these rights if you stand up and fight for them! Talk to the retailer, explain your concerns, seek a mutually agreeable remedy, then go to your "Office of Fair Trading" if you can't agree.
edit - IF it is the retailer I suspect - there were a number of issues with their spiral head thicknessers! I have one, and I'm not happy with how they dealt with my new machine when it failed without even a stick of timber in it! They have a very convenient interpretation of their responsibilities under ACL.Mobyturns
In An Instant Your Life CanChange Forever
-
8th December 2023, 09:37 AM #6Senior Member
- Join Date
- Nov 2017
- Location
- Melbourne
- Age
- 73
- Posts
- 358
-
8th December 2023, 09:43 AM #7Senior Member
- Join Date
- Nov 2017
- Location
- Melbourne
- Age
- 73
- Posts
- 358
Possibly, but if it was a return rather than a demo I'd expect the dealer to want convincing evidence of a defect before refunding or replacing. I'm just hoping that there isn't some other defect that's going to appear with more use. If it was returned on the basis of the missing insert the dealer could have replaced that for a few dollars, while the damaged insert wasn't a fault with the machine but because something like timber with a nail in it was put through the machine.
-
8th December 2023, 09:52 AM #8Senior Member
- Join Date
- Nov 2017
- Location
- Melbourne
- Age
- 73
- Posts
- 358
The problem is that I have no hard evidence that it was a returned machine rather than a demo, just the common sense inference that dealers don't put timber with metal in it through a machine in their own shop.
It was sold 'as is'.
I used to do this for a living. I can't be bothered. It'll take a couple of years to reach VCAT (consumer complaints tribunal in Victoria) and I could be dead by then.
If the machine works okay for the next couple of years I'll still be ahead financially. And if I'm dead I don't care.
-
8th December 2023, 10:37 AM #9
Which retailer? blue or brown?
-
8th December 2023, 10:30 PM #10Senior Member
- Join Date
- Nov 2017
- Location
- Melbourne
- Age
- 73
- Posts
- 358
-
8th December 2023, 11:13 PM #11Senior Member
- Join Date
- Nov 2017
- Location
- Melbourne
- Age
- 73
- Posts
- 358
The one I bought was advertised as a spiral head thicknesser, which seems to be standard misleading, deceptive and or just plain (and implausible) ignorant conduct by most sellers of segmented head thicknessers that don't have a hint of a spiral or helix on their cutter heads. Then again, the staff member who discussed the machine with me before I bought it on my own assessment clearly had no idea that it wasn't a true spiral head cutter and couldn't get his head around the notion of cutters on a spiral.
I checked the head before I bought it and knew it was just a straight line segmented head cutter, but it was still about 25% below the going price everywhere for these regularly misrepresented 'spiral head' thicknessers so it still looked like a fair deal.
In fairness to the seller, it's not exclusively their machine that's the problem. It's the generic machine that is sold by many retailers under various house name brands and with slight variations. On my limited experience with a standard bladed version of the same machine, sold by another major tools outlet under its house brand,which seized a bearing on a feed roller which then destroyed a drive gear in the drive system, and from what I've seen of comments by others about the same generic machines, it seems to be one of those lucky dip budget / entry level items where you can get a lemon or a durable and reliable machine.
What's more concerning is that some specialist woodworking retailers sell what appear to be much the same budget / entry level thicknessers with true spiral or helix heads for a much higher price, but apart from the cutter head it seems to be much the same machine and not worth the massive mark up as it's still not the high quality machine you could reasonably expect to go with a top line spiral cutter.
Again in fairness to the seller, and to the manufacturer(s) of the various versions of these machines, I have to say that after repairing one damaged insert and replacing the missing insert my misrepresented "not spiral head thicknesser" does a perfectly adequate job to the standard I expected and wanted, including on aged red gum which is the hardest timber I'm likely to put through it. How long it lasts remains to be seen.
-
9th December 2023, 03:45 PM #12
Definitely a pretty fair assessment of the state of play. The drive train to the drive rollers seems to be an "Archilies heel" of the lunchbox style thicknessers. There is a true spiral cutter head in the Sherwood. It goes a great job, however there are a number of "features" that I dislike.
Mobyturns
In An Instant Your Life CanChange Forever
-
9th December 2023, 04:12 PM #13
Pardon my ignorance, but wouldn't a demo be covered under a 1 year warranty, regardless?
-
9th December 2023, 04:47 PM #14
-
9th December 2023, 08:02 PM #15
Where to start -
- the anti-kickback pawls have a habit of preventing wood passing through, they don't seem to return to an in-feed state, despite there not haveing been a kickback.
- the restriction on depth of cut either side of centre
- the depth of cut indicator does similar to 1. above
- the "dial in" thickness setting is not accurate, more like erratic.
- the dust chute attachment is flimsy
- uses a non-industry standard carbide insert
However it does produce excellent results off the cuttersMobyturns
In An Instant Your Life CanChange Forever
Similar Threads
-
The Cautious Flight Attendant ???????????????????????
By KBs PensNmore in forum WOODIES JOKESReplies: 0Last Post: 17th February 2020, 10:59 PM -
Timber marked TBW ?
By Dengue in forum TIMBERReplies: 5Last Post: 26th April 2016, 03:12 PM -
New Email Scam - Bogus Traffic Fines Supposedly from the Australian Federal Police
By RoyG in forum COMPUTERSReplies: 6Last Post: 4th May 2015, 12:22 PM -
When buying machines from China
By simso in forum CNC MachinesReplies: 6Last Post: 8th March 2014, 12:45 AM -
Buying 4 Essential Workshop Machines
By HappyHammer in forum HAND TOOLS - POWEREDReplies: 34Last Post: 3rd July 2004, 07:38 PM