Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Drill press, return spring.
-
4th July 2018, 07:01 PM #1GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
Drill press, return spring.
Today the return spring in my drill press broke. After 32 years I guess that is reasonable.
The drill press is a Taiwanese made unit called a True Tool. Not sure the company exists anymore.
Wondering if anyone has replaced a return spring for a pedestal/bench drill press and where one might go to try and get a similar type spring?.
Seems a pity to ditch the whole machine over just a broken spring.
Thanks in advance.
-
4th July 2018 07:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th July 2018, 07:40 PM #2Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Failing a replacement part, could you rig up one of these to the handle to pull it back when you let go? https://www.ebay.com.au/p/Retractabl...9901311&chn=ps
We have one on the docking saw at work
-
4th July 2018, 08:20 PM #3
Contact Peerless in Melbourne, they just may have one that will fit, give them the width of the spring and number of coils un tensioned and diameter of housing it is mounted in.
The person who never made a mistake never made anything
Cheers
Ray
-
4th July 2018, 09:10 PM #4GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
Well, looked on ebay just in case there was something. Lo and behold.
Something like this is what I'm after, might take a bit of faffing round till the ideal one is found.
Similar Threads
-
Fixing drill press spring return
By Arron in forum GENERAL & SMALL MACHINERYReplies: 6Last Post: 12th September 2016, 01:16 PM -
Broken drill press spring
By Tiger in forum GENERAL & SMALL MACHINERYReplies: 6Last Post: 13th May 2014, 08:15 PM -
Richardson Drill Press Spring
By chalmers888 in forum METALWORK FORUMReplies: 17Last Post: 5th March 2014, 12:08 AM -
Drill press quill feed return spring fitment
By Com_VC in forum METALWORK FORUMReplies: 4Last Post: 2nd January 2014, 08:02 PM -
Drill Press - Broken Spring
By Mike_R in forum GENERAL & SMALL MACHINERYReplies: 4Last Post: 10th November 2009, 06:45 PM