Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2009
    Location
    bundaberg
    Posts
    38

    Default feed back on baumr or swarts combination sliding mitre saw.

    My old bell carroll sliding mitre saw has died and i would like some professional advice / feed back (pros and cons) on the BAUMR and SWARTS brands. thanking you in anticipation.Derrick.Smith.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2015
    Location
    Hunter Valley
    Age
    56
    Posts
    1,342

    Default

    Cannot directly comment on either form personal experience, other than to say I've not come across Baumr before, but the Swarts unit is highly regarded in these forums: Swarts tools 305mm 12" sliding compound mitre saw drop saw

  4. #3
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    I have had nothing to do with either but I noticed the following specs.
    Baumr-ag (if that’s the mode,) has a blade diam. of 210mm while the Swarts is 305mm. The Baumr has mitres to 45 degrees with a bevel in one direction only to 45 degrees while the Swarts has 45 degrees both directions. Also it appears the Baumr cutting head has sliding rails while the Swarts cutting head slides on the rails. This means you would need more room behind the saw to accomodate the rails on a Baumr.

  5. #4
    Join Date
    Jul 2009
    Location
    bundaberg
    Posts
    38

    Default

    Thank you midnightman & lappa for your prompt reply and information.deckell.

Similar Threads

  1. NEW Swarts tools 305mm 12" sliding compound mitre saw drop saw
    By Xanthorrhoeas in forum PRODUCT REVIEWS
    Replies: 174
    Last Post: 13th June 2020, 08:59 AM
  2. N.S.W. Makita LS1017L sliding compound mitre saw with Ozito mitre saw stand
    By DarcysDad in forum WOODWORK - Tools & Machinery
    Replies: 0
    Last Post: 20th March 2019, 08:10 AM
  3. 10" Carbatec combination thicknesser feed in roller clogging
    By thevoice in forum WOODWORK - GENERAL
    Replies: 2
    Last Post: 29th April 2015, 06:38 PM
  4. Could I get some feed back on this one please
    By colbra in forum TABLE SAWS & COMBINATIONS
    Replies: 7
    Last Post: 26th January 2013, 09:39 AM
  5. Need some feed back please
    By Nai84 in forum WOODTURNING - PEN TURNING
    Replies: 29
    Last Post: 9th January 2013, 08:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •