Thanks: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
-
27th April 2018, 05:22 PM #16.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
45/64" = 17.86 mm but seeing seeing as its only Al that is being tapped then using an 17.5 mm or an 11/16" bit should be OK.
I have one here if you need to borrow it.
If you want to get fancy you can also borrow an adjustable reamer to open up the hole a little more so the tap will bite more easily.
Practice on a piece of Al before trying the compressor,
-
27th April 2018 05:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th April 2018, 05:55 PM #17SENIOR MEMBER
- Join Date
- Sep 2013
- Location
- Jarrahdale WA
- Posts
- 370
You're on again Bobl...
Similar Threads
-
Air Compressor Problem
By Oldneweng in forum METALWORK FORUMReplies: 48Last Post: 29th October 2014, 04:15 PM -
Router problem or operator problem ?
By Ozziespur in forum WOODWORK - GENERALReplies: 5Last Post: 15th August 2011, 03:23 PM -
Air compressor drive problem
By jardyDIY in forum GENERAL & SMALL MACHINERYReplies: 17Last Post: 15th August 2010, 07:32 PM -
Turn your $99 GMC compressor into a $1200 compressor for $85 aud
By honda900fz in forum GENERAL & SMALL MACHINERYReplies: 3Last Post: 7th October 2009, 08:29 PM