Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: hot melt edge bander help
-
25th October 2014, 12:03 PM #1New Member
- Join Date
- Sep 2011
- Location
- Perth.WA
- Posts
- 4
hot melt edge bander help
hope this is the right thread sorry in advance if not could you point me in the right direction
I'm after help, advise for the best/cost effective option to buying a hot melt edgebander that I can set up in my garage that wont cost an arm and a leg
cheers Rich
-
25th October 2014 12:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th October 2014, 05:54 PM #2
Are you doing a LARGE amount of edging.... I did an entire Kitchen cupboard fitout using a clothes iron and some thick paper over the edging and a hand held edging laminex trimmer.
-
25th October 2014, 11:37 PM #3New Member
- Join Date
- Sep 2011
- Location
- Perth.WA
- Posts
- 4
I can buy a pre glued edge bander hebrock .... But I use polytec products mainly and paper edge is few and far between ! I've just gone on my own in the last few months and before that I worked for a company that provide all cabinets for one of WA's biggest builders and everything was edged in 1mm & 2mm abs and this finish and look is what I'm after
-
26th October 2014, 01:09 PM #4Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Avoid Hebrock like the plague. We bought one of their hot melt machines a few years ago and there are just so many things that are poorly designed.
I can't help with pre-glued machines as I've never used one, but I wouldn't trust a Hebrock.
Similar Threads
-
ERMO Edge bander
By mickw in forum WOODWORK - GENERALReplies: 0Last Post: 7th May 2013, 05:44 PM -
Hot Glue Edge Bander
By Matt Stone in forum GLUEReplies: 0Last Post: 28th January 2008, 01:18 PM -
Edge Bander
By Gaza in forum HAND TOOLS - POWEREDReplies: 20Last Post: 13th November 2005, 07:20 PM