Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 10 of 10
  1. #1
    Join Date
    Oct 2014
    Location
    South Australia
    Posts
    86

    Default Jet 12" benchtop thicknesser

    Hi Guys,

    I am looking at purchasing one of these from Carbatec, or failing that one of the other similar units on offer in Oz.
    It will be used mostly for recycling WRC, and the odd bit of hardwood for electric guitar bodies.
    I had the Ryobi version previously, it used disposable 2 sided knives.

    My question re the Jet is that they appear to have single edged knives that can be resharpened.
    Does anyone know how often this can be done before they are buggered ?

    As far as I can tell most of these twin blade units do pretty much the same job, so because I am a tight I am trying to work out which machine will have the cheapest consumables.

    Thanks in advance to anyone who can answer my question.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2017
    Location
    Melbourne
    Age
    42
    Posts
    126

    Default

    I'm looking at one of these too... It's between this, the Ryobi, the Triton or if I can stretch my budget the Metabo DH330.

    Any thoughts from the experts on here would be appreciated!

  4. #3
    Join Date
    Oct 2014
    Location
    South Australia
    Posts
    86

    Default

    Hi Wynterplace,

    I ended up buying the Jet.
    Regarding the blades, if you buy the Jet you get a spare set in the box, both sets are single sided, Carbatec didn't mention this.
    The other thing I found out is the double sided replacement blades that fit the current Ryobi will also fit.
    Still no idea how many sharpens I will get out of the single sided ones.
    The machine itself does a good job for what it is, so far I have run approx 40 m of western red cedar and about the same of Vic ash with no drama.
    cheers,

  5. #4
    Join Date
    Jan 2017
    Location
    Melbourne
    Age
    42
    Posts
    126

    Default

    Thanks for the reply mase.

    How loud is it? being a non-spiral cutter I'm concerned about the noise where I live. My neighbours are very close, and 7mm/minute for a 400mm length is over 5 minutes of howling.

    Also, have you run really hard wood through it? I'd like to be able to run red gum and jarrah if possible.


    Sent from my iPad using Tapatalk

  6. #5
    Join Date
    Sep 2011
    Location
    Hervey Bay
    Posts
    250

    Default

    I've got one, and they are very noisy, but the feed rate is 7 metres / minute.

    Jeff

  7. #6
    Join Date
    Jan 2017
    Location
    Melbourne
    Age
    42
    Posts
    126

    Default

    Hahaha. I read it as 7mm/minute.


    Sent from my iPad using Tapatalk

  8. #7
    Join Date
    Dec 2004
    Location
    Northen Rivers NSW
    Age
    57
    Posts
    2,837

    Default

    I have a ryobi and it's so noisy I don't use it so the neighbour s stay nice.

    I am trying to find a local shop that can do it for me.


    Sent from my iPhone using Tapatalk


  9. #8
    Join Date
    Jan 2017
    Location
    Melbourne
    Age
    42
    Posts
    126

    Default

    I live next to a retirement village. They haven't cracked it about the saw, the router, my barking dog or my screaming daughter... but that might tip them over the edge.


    Sent from my iPad using Tapatalk

  10. #9
    Join Date
    Jan 2017
    Location
    Melbourne
    Age
    42
    Posts
    126

    Default

    I could always take the machine and the wood to work and do it there... in and industrial estate.


    Sent from my iPad using Tapatalk

  11. #10
    Join Date
    Oct 2014
    Location
    South Australia
    Posts
    86

    Default

    It is very loud as the others have stated.
    I deal with this by...
    I use it inside the shed now I have my dust extraction set up properly( with the door shut).
    I get home from work about 4 pm and use it then, as my nearest neighbours are usually still out.
    I only run it for 15/20 minutes at a time, I don't do production work anymore, this is just a hobby.
    Taking it to work if you have a lot timber to thickness is a good idea, I have done this in the past.
    I've found people will put up with loud noise if its only for short periods and not every day, so i spread the "noisy work" over the week,and do the "quieter stuff" on the weekends.
    For the difference in cost between the Jet and a spiral/segmented head machine I could buy enough timber already machined to last quite a while, but that defeats the purpose of the hobby for me.

    It will do Jarrah, just don't try to put a 3 metre length of 200 x 50 through it.Small sections only.
    Cheers,

Similar Threads

  1. Getting rid of "cupping" on a pine laminated benchtop
    By lateral in forum WOODWORK - GENERAL
    Replies: 5
    Last Post: 2nd August 2007, 10:14 PM
  2. Benchtop thicknesser - rebooted...
    By Mr Brush in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 15
    Last Post: 29th December 2005, 07:33 AM
  3. Benchtop Thicknesser
    By mat in forum POLLS
    Replies: 26
    Last Post: 25th March 2005, 11:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •