Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Pauslcall Sander/Linisher
-
15th March 2019, 10:55 PM #1
Pauslcall Sander/Linisher
Looking for photos, dimensions, details of what the fence is like for a Pauslcall Sander/Linisher
So far this is the best image I’ve been able to come up with.
…..Live a Quiet Life & Work with your Hands
-
15th March 2019 10:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th March 2019, 04:07 PM #2
I've recently acquired something very similar if not identical. I will post some pics when I get home tomorrow.
Those were the droids I was looking for.
https://autoblastgates.com.au
-
18th March 2019, 04:04 PM #3
Here's the promised photos.
A piece of heavy angle iron with a shim under the bolts would work ok.
20190318_150329.jpg20190318_150344.jpg20190318_150421.jpg20190318_150439.jpgThose were the droids I was looking for.
https://autoblastgates.com.au
-
18th March 2019, 04:38 PM #4
That’s great thanks. I have some heavy angle I can cut down and a spacer shouldn’t be an issue.
…..Live a Quiet Life & Work with your Hands
-
18th March 2019, 04:40 PM #5
Mine doesn’t have the disc sander part of it ever did.
…..Live a Quiet Life & Work with your Hands
-
18th March 2019, 05:47 PM #6
The disc is just a faceplate that slides over the other end of the shaft. Wouldn't be hard to make as long as you could weld square.
The disc table on mine is home made(not by me) but seems to work ok. Just a bit of plate that slides in and out on a welded frame. I had to modify1 it to get it to sit square.
1 big thumb detector and a bit of brute force.Those were the droids I was looking for.
https://autoblastgates.com.au
Similar Threads
-
WANTED:QLD. Linisher/ disc sander + bobbin sander
By lawqbarr in forum WANTED & WANTED TO BUY - in AustraliaReplies: 0Last Post: 14th November 2018, 07:01 AM -
linisher sander
By manodav in forum GENERAL & SMALL MACHINERYReplies: 1Last Post: 3rd November 2010, 06:20 AM -
BB-80S sander/linisher
By pjt in forum GENERAL & SMALL MACHINERYReplies: 0Last Post: 31st May 2010, 01:03 AM