Thanks: 0
Likes: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Planer/ Thicknesser Blades
-
15th August 2012, 08:26 AM #1New Member
- Join Date
- Nov 2011
- Location
- Ocean Reef
- Posts
- 2
Planer/ Thicknesser Blades
G'day Fella's, anyone know where I can get blades for a CT330 Thicknesser/ Planer?
They're 330mm or 13.5 inches, double edged and and have 2 locating holes. CarbaTec are charging $69 a pair and $50 to sharpen them, which is a bit rich.
-
15th August 2012 08:26 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th August 2012, 11:05 AM #2
That should be the spur on you need to start sharpening them yourself. Plenty of info on this site and loads more on the net. Make a wood jig and glue some sandpaper to a flat surface. Every sharpen you save $50 so what could be better.
Regards
John
-
15th August 2012, 06:19 PM #3
I had mine sharpened at Henry Bros. for $10 each.
Try your local saw doctor/sharpener.John
-
15th August 2012, 07:01 PM #4
As well as sharpening, I've also had Henry Bros make up extra sets of blades for my JPT-310. Better quality and much cheaper than the JET items.
Your only problem might be the need for holes in the blades - the JPT-310 takes just a straight blade with no holes, so Henry Bros can make them from standard blade stock which they buy in long lengths. Don't know if they have a capability to put holes in the blades.
-
15th August 2012, 11:47 PM #5
I am sure they could match the holes in your blades.
Either take your existing blades or give them the model details.
I had had blades made and sharpened.
A Good service.Scally
__________________________________________
The ark was built by an amateur
the titanic was built by professionals
Similar Threads
-
toolmac planer thicknesser blades
By bungwahl in forum HAND TOOLS - POWEREDReplies: 0Last Post: 6th April 2012, 09:24 PM -
Planer / Thicknesser blades
By ptrott in forum SHARPENINGReplies: 4Last Post: 18th June 2011, 02:10 AM -
Sharpening Planer Thicknesser Blades
By GraemeCook in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 2nd September 2008, 03:00 PM -
Metabo planer/thicknesser blades
By benzine in forum HAND TOOLS - POWEREDReplies: 3Last Post: 20th May 2007, 03:58 PM