Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 23
  1. #1
    Join Date
    Dec 2011
    Location
    Hewett, SA
    Age
    62
    Posts
    9

    Default Real Planer Thicknesser

    I've hit these forums several times in my search for answers so I figured it was time to join. So here goes my first post.

    I've wanted to buy a planer thicknesser for a while but as an amateur on a limited budget (purse strings not controlled by me) I'd like to be very careful what I buy.

    I've noticed a number of "planer thicknessers" on the market (Ryobi, DeWalt) but they are not really planers, just thicknessers (my Dad, 90, a carpenter his whole life, explained the difference to me).

    Mitre 10, now stocking Rockwell since Ryobi became exclusive to Bunnings, have a Rockwell Thicknesser and Planer in one, model RT7561. Planer on top and thicknesser below the planer table.

    ROCKWELL: Benchtop Planer Thicknesser

    I have been unable to find any reviews on this machine anywhere. I already have a Rockwell drill press and belt sander and have had no issues with them at all.

    Does anyone know anything about this machine? Am I trying to get too much in one machine for too little price? Any feedback welcome.

    Cheers.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2007
    Location
    Mainland N.Z.
    Posts
    877

    Default

    I'm at the stage where I'd like a planer and/or thicknesser too. A machine very, very similar looking to the Rockwell (same factory in China maybe?) is available here. I've looked at one and I'm not buying it. They just seem too lightweight. So I'll hold out for a decent secondhand machine.....or two.
    We don't know how lucky we are......

  4. #3
    Join Date
    Apr 2011
    Location
    Dandenong, Vic
    Posts
    2,029

    Default

    204mm width may be limiting. I'd like something like this but want 330mm width.

  5. #4
    Join Date
    Jan 2007
    Location
    Grange, Brisbane
    Age
    53
    Posts
    1,642

    Default

    How much is it then?
    Cheers, Richard

    "... work to a standard rather than a deadline ..." Ticky, forum member.

  6. #5
    Join Date
    Dec 2011
    Location
    Hewett, SA
    Age
    62
    Posts
    9

    Default

    Rhancock, well, the going price at Mitre 10 is $409. Not much different in price to the Ryobi Planer Thicknesser (that really only just thicknesses) at Bunnings.

    Is the price too good to be true for a combination machine like that? I hunted around on the web for other combination machines and your looking at $1300+ for a machine that comes on a cabinet stand with a planing table that is 1 meter long. I just don't have the space for something that size.

    Fly, I noticed the width issue too, but I generally use smaller material and biscuit joint them to make larger panels anyway.

    Cheers.

  7. #6
    Join Date
    Jul 2011
    Location
    Bendigo
    Age
    73
    Posts
    462

    Default

    I very recently had need for a cheapie corded drill and a rechargable so I bought Rockwell.
    These are what I term jobsite tools so cheap is the name of the game. Far too soon to give a long term review but no nasty surprises so far. They seem good enough for what I want.
    But, having said that, a combination thicky/planer is a whole different world.
    Personally, if I had a budget of $400 to buy, I think I'd be looking at second hand.
    Some of the older machines are very good value and bang for your buck.
    Just make sure you try it out first and factor in a re-sharpen or replacement blades.
    Cheers
    Jim
    Being happy doesn't mean everything is perfect. It means you've decided to see beyond the imperfections....

  8. #7
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    4,882

    Default

    I have never had a look at rockwell tools yet so will say nothing either way about build or quality. I will however point out the practical limitations of that machine. The bed is very short so jointing long bits of wood is going to be hard to do. Good jointers have long cast iron beds. the longer the better for big work. May be ok if you only do boxes or small projects.
    Regards
    John

  9. #8
    Join Date
    Dec 2011
    Location
    Hewett, SA
    Age
    62
    Posts
    9

    Default

    Grandad, Orraloon,

    Thankyou both for your advice. The problem is seeing one of these set up on display somewhere. You can't tell a lot looking at a picture on a box.

    I may have to look at buying two separate machines but I expect that will double my expenditure. As for a second hand machine, they're all so big and I have limited space in my workshop. I'll keep hunting to see what I can find.

    Cheers.

  10. #9
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    I know nothing about the machine you linked to, however some food for thought
    The planing width, 204mm is, IMO, OK. Rarely would you need to go wider
    The tables are far too short -- ideally they should be a minimum of about 800mm
    The thicknessing range -- 5 to 120mm -- is too little, ideally it should be >200mm
    The machine is too light -- my planer/thicknesser, which is a 200mm unit, weighs in at around 170kg

    I appreciate that your budget is limited -- what do you want to build?
    regards from Alberta, Canada

    ian

  11. #10
    Join Date
    Dec 2011
    Location
    Hewett, SA
    Age
    62
    Posts
    9

    Default

    Ian,

    Thanks for your input. Your comments are consistent with what others have said. I need the machine to be semi-portable as I don't have a huge amount of room. 170kg is not something I would move in a hurry.

    As for what I build? Well, my wife makes reborn dolls and I've made her dolls furniture to pose/photograph the dolls on. I've also made a relatively large corner computer desk with drawers, shelves and doors for my step-son. So in answer, if it can be made of wood, I'll try to make it.

    Woodworking is a hobby for me. I spent many an hour as a kid watching my dad make things and I guess some of it has rubbed off. Can't beat the smell of freshly cut wood.

    In a nutshell, I'm looking for a benchtop version, but after the responses I've had here I think I may be expecting too much from a combo machine. There are plenty of thicknessers available, but I haven't found a benchtop planer yet.

    Cheers.

  12. #11
    Join Date
    Aug 2003
    Location
    Conder, ACT
    Age
    77
    Posts
    6,051

    Default

    I am also watching this thread with interest.

    Rarely need more than 150mm in any direction,
    Extremely short on room.


    oh and here is a bench top jointer Carba-Tec® 6" Benchtop Jointer : CARBA-TEC

  13. #12
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    The 170kg sits on a roller stand like this one Universal Mobile Base - 227kg capacity : CARBA-TEC
    Moving it is easy

    But if you know how to flatten one face and square an edge using a #5 or #6 orv #7 plane, then maybe a thicknesser is all you need
    Last edited by ian; 19th December 2011 at 04:47 PM. Reason: added bit about hand plane
    regards from Alberta, Canada

    ian

  14. #13
    Join Date
    Dec 2011
    Location
    Hewett, SA
    Age
    62
    Posts
    9

    Default

    LOL DavidG, I just found the jointer you posted on another site.

    So, this is what I've found so far. The Makita 2012nb seems to be a good quality mid range thicknesser for $775 (always liked Makita) or the Carbatec Economy for $429. Then there is the Carbatec planer/jointer that goes for around $270.

    Problem is, I have to convince the finance manager that I want to spend more than twice the amount on two machines. A good combo machine would have been ideal, even if it was a couple hundred $ more. It seems the option is small and cheap or big and expensive, nothing mid range.

  15. #14
    Join Date
    Dec 2011
    Location
    Hewett, SA
    Age
    62
    Posts
    9

    Default

    Here's a nice looking machine.

    DRAPER BENCH MOUNTED 1500W 230V PLANER THICKNESSER | eBay

    The UK seem to have access to a larger range.

  16. #15
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    There's also a model from Metabo Product catalogue halfstationary and stationary tools - Products - Metabo Australia - Power tools built by professionals for professionals
    I've seen them at the Sydney wood show, but am unsure of the price

    Whichever way you go you will need a chip extractor as well
    regards from Alberta, Canada

    ian

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 0
    Last Post: 12th October 2007, 08:03 PM
  2. Thicknesser or Planer Thicknesser (Jointer)
    By Markw in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 5
    Last Post: 9th November 2006, 01:58 PM
  3. Planer or Thicknesser??
    By Taffy in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 5
    Last Post: 14th August 2004, 05:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •