Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Taper for Jacob No.34 chuck
-
25th October 2017, 04:54 PM #1SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
Taper for Jacob No.34 chuck
I have an old No.34 chuck that I would like to put on my current drill press but I need another arbor. There appears to be several models of the 34 chuck (eg. 02 and 33) but mine only shows No.34, the capacity and "made in Sheffield". I think it may be JT6 but could someone please confirm this so I can order a new arbor.
Thanks for your help.
-
25th October 2017 04:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th October 2017, 06:03 PM #2
-
25th October 2017, 07:52 PM #3SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
Thanks Treecycle, I'll try measuring it and see what I come up with.
-
26th October 2017, 11:32 AM #4New Member
- Join Date
- Mar 2010
- Location
- Melbourne
- Posts
- 8
If you can see the part number on the chuck , have a look at https://www.newmantools.com/jacobs/arbors.htm
-
26th October 2017, 12:11 PM #5Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
I had a few Jacobs chucks rescued from old drill presses without an arbor and I needed two morse taper arbors to use them with turning.
Went to Aussie Machines & Tools in Dandenong and got the two arbors.
I did take the chucks with me, they measured and tried the arbors. Now to keep an eye out for more drill presses being on hard rubbish days.
I would give them a call and see if they can help you.
Peter.
Peter.
-
26th October 2017, 01:54 PM #6SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
Thanks Sturdee, I'm going to Dandenong next week so I will give them a try.
-
26th October 2017, 03:55 PM #7SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
Thanks Paul. I rang Sturdee's suggestion in Dandenong and they said that they had a variety of arbors so that one will fit.
Similar Threads
-
How do you remove the #2Morse Taper Shank From A Jacobs Drill Chuck ?
By RoyG in forum WOODTURNING - GENERALReplies: 5Last Post: 6th April 2016, 09:45 PM -
No chuck or morse taper ?
By Ozceltic63 in forum WOODTURNING - PEN TURNINGReplies: 13Last Post: 3rd June 2010, 10:52 AM