Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: BOC LPG cutting nozzle size??
-
11th May 2015, 02:35 PM #1Novice
- Join Date
- Jul 2007
- Location
- tasmania
- Posts
- 12
BOC LPG cutting nozzle size??
Hi All
I have a heap of cutting to do, mainly 1/4 inch thick and 1/2 inch thick mild steel but also some railway line.
Would the 1 cutting nozzle do both jobs?
What size for the Boc 2 seat Oxy/LPG cutting nozzles do I need?
Available sizes are 6,8,12,15,20 and 24.
Regards
Dave
-
11th May 2015 02:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th May 2015, 05:24 PM #2GOLD MEMBER
- Join Date
- Sep 2010
- Location
- Lebrina
- Posts
- 1,099
Number 8 is ideal for 5-10mm, 12 for 12-20mm and number 15 covers 25-75mm.
Number 12 may scrape in on the railway track, but I doubt it. If you are restricted to only one tip, I would go with a 15 as you can turn the preheat flame down for 5mm but you can't make a number 8 cut 25mm.
-
12th May 2015, 01:25 PM #3Novice
- Join Date
- Jul 2007
- Location
- tasmania
- Posts
- 12
OK, thanks Karl, I'll get a No. 15. I can soon get a smaller one if the 15 uses too much gas on the lighter work.
Dave
-
12th May 2015, 02:13 PM #4GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Dave, when you go to cut the railway line, put a cold chisel nick in it at the point of cut, as it won't need as much preheating prior to cutting.
Kryn
Similar Threads
-
Spray Guns... Nozzle Size???
By codysheridan1 in forum FINISHINGReplies: 5Last Post: 4th March 2015, 09:07 AM -
Cutting To Size in Sydney?
By thomen in forum TIMBERReplies: 3Last Post: 12th May 2012, 10:34 PM -
Cutting Laminex to size
By andyd in forum WOODWORK - GENERALReplies: 14Last Post: 31st August 2010, 08:23 AM -
Spray guns - nozzle size
By jaspr in forum FINISHINGReplies: 3Last Post: 3rd January 2008, 02:25 PM -
Nozzle Size For Spraying Shellac
By Sapling in forum FINISHINGReplies: 3Last Post: 8th May 2007, 10:43 PM