Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
23rd February 2019, 10:00 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,401
Guys please critique me welds, I'll brace for a size 11
New machine not that i notice much difference over the Italco as in arc performance but the Unimig has more power to put out, this first weld was a fillet weld on six mm material aluminium, second weld wss on factory settings again than thirdly i upped my voltage by 1 number and i went up about 2 numbers on the wire feed and here we have weld number 3
in weld number 3 am i understanding the machine better as u want more bite and u ideally want a concave looking weld?
i know i have porosity im using the steel liner just to test the machine i bought it new but second hand i will get the teflon liner later on before i do some work so please don't flame me for the porosity i know its there and i know why
think i am finally understanding how to set up and use the mig
site is having problems i will upload pictures soon pics are going missing
Read the full thread at metalworkforums.com...
-
23rd February 2019 10:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Need someone to look over my welds
By gazza2009au in forum WELDINGReplies: 22Last Post: 28th April 2015, 04:21 PM -
Some welds for you to critique
By Zumanity in forum WELDINGReplies: 20Last Post: 23rd August 2014, 11:30 PM -
Very first TIG welds. please advise
By Zumanity in forum WELDINGReplies: 5Last Post: 9th May 2014, 03:28 PM -
How many welds?
By Single-phase in forum WELDINGReplies: 7Last Post: 24th October 2009, 04:23 PM