Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: My welder doesn't...
-
28th December 2018, 08:40 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
My welder doesn't...
Before I had read any of the comments about machine selection, I bought myself a "Rossi p200iS multi function - ac/dc tig, pulse, mma, plus plasma cutter.
Its been fine for 2 years, although really not used a lot.
Fired it up boxing day, all the lights are on but there are no electrons at home, at least none interested in making the trek down to the hand piece and back via the work lead.
I get a hf pilot arc using tig, but no welding voltage.
Yes I checked for a good earth.
Can any learned forum members provide any guidance?
I'd rather attempt a repair before replacing as the budget has been stretched by other domestic projects recently..
(and I just sold my arc welder because I didn't need it....)
Russ
Read the full thread at metalworkforums.com...
-
28th December 2018 08:40 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
It doesn't take long......
By Grumpy John in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 8Last Post: 23rd July 2015, 09:30 PM -
I bet Bob doesn't have one of these
By RayG in forum METALWORK FORUMReplies: 9Last Post: 16th May 2011, 06:04 PM -
Doesn't it just ... you when----
By DavidG in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 25th September 2007, 06:53 PM -
Doesn't get any better
By smidsy in forum WOODTURNING - GENERALReplies: 5Last Post: 31st March 2005, 06:50 PM -
What DOESN'T peeve me off.....
By Neil in forum WOODIES JOKESReplies: 6Last Post: 24th June 2001, 11:35 PM