Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Welding using a gen set.
-
22nd August 2018, 08:50 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Welding using a gen set.
Hi Guy's,
Was curious if any of you have had good success in using a non inverter arc welder on a non inverter gen set?
I tried a few different arc welders on a 8KVA Honda powered gen set, but overall a poor result I thought.
Arc hard to start and would cut out, even sound and look not the same as grid supply.
From the results I would assume it was doing the gen set no favours also.
Live and learn.
Trev
Read the full thread at metalworkforums.com...
-
22nd August 2018 08:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
C02 for Mag Welding
By toyota254 in forum WELDINGReplies: 20Last Post: 13th June 2012, 04:56 PM -
Welding available
By Dobre in forum EMPLOYMENTReplies: 0Last Post: 4th April 2010, 11:45 AM