Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: H.Boker Fret saw,
-
21st April 2019, 11:57 AM #1
H.Boker Fret saw,
A little hoilday project was this H.Boker fret saw that had been hanging on my workshop door crying to have some attention.
So ,we gave it some, sorry no process pics, but I’m sure you all know the story, pull it apart remove rust.
I then turned up a new handle in Olive Wood , such a beautiful gorgeous timber to work and turn.
Put it all back together,and now to find something else to do [emoji849].
-
21st April 2019 11:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd April 2019, 07:57 AM #2Member
- Join Date
- Feb 2019
- Location
- Adelaide, Australia
- Posts
- 54
That olive wood looks great. I love a good "Before and After", especially when a tool goes from sitting in the corner to becoming a real user.
-
22nd April 2019, 11:30 AM #3
Thanks CB
There is something special about using a tool you either make or restore yourself.
Cheers Matt.
-
22nd April 2019, 12:25 PM #4
Yes Matt
A very nice job indeed. The hacksaw/fret saw/coping saw brigade are all very useable old tools as well. Also some interesting items in the backdrop. Looks like three old Stanley No.42 saw sets. This is very topical for me as I have just deliberately purchased a saw set (different brand) as opposed to coming in a bundle of goods which is how I acquired most saw sets, and a small 8" hacksaw. Is that an early D8 behind? Can't quite see the number.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
22nd April 2019, 07:59 PM #5
Paul,
Will you stop just helping your self to a perv around my shop every time I post pics[emoji849][emoji849].
Please some dignity.
Are we now branching out in too saw sets too.
Yes they are Stanley no 42 funny you should perv on them I was thinking the black one could do with a fresh paint job[emoji6].
Don’t think there D8 handle saws the three to the left are all small back saws.(unfortunately I’m back in Melbourne [emoji21])
Cheers Matt.
-
22nd April 2019, 10:11 PM #6
Excalty the same saw is on eBay
Ahrems Goodline Germany.
https://rover.ebay.com/rover/0/0/0?m...2F323704639461
Different brand tho,that’s interesting anyone any ideas.
Cheers Matt.
-
22nd April 2019, 10:55 PM #7
We were looking at different pix!
This is the one I was talking about:
Matt's Disston.jpg
I have very little idea about the back saws as they are rather secretively hidden away. However, now you mention it, I can see a No.9 backsaw with the Reagan handle. The one above it with the open handle and split nuts could be a British saw with the prominent fleck in the Beech handle.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
22nd April 2019, 11:10 PM #8
Your spot on Paul,
Yes that is a D8
I take back all my rude remarks about being a perv.
An also spot on about the other three back saws.
I hand out out extra points if you can date them [emoji849].
Cheers Matt,
-
23rd April 2019, 12:17 AM #9
Does that mean I am just a plain old perv, but not with the associated rudeness?
As far as dating the saws, you have hidden some of the clues. The No.9 I think could range between 1910 and 1920 and the split nut will be prior to 1890 probably.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
23rd April 2019, 07:17 AM #10Member
- Join Date
- Feb 2019
- Location
- Adelaide, Australia
- Posts
- 54
This was one of the first tools I made all pretty and brought back into working order. It was a few years ago.
I picked a good first target, as the rust looked bad but was very light and easily sanded off. I sanded the handle by chucking it in drill and then put on a few coats of shellac.
IMG_0239.jpg IMG_0343.jpg
I also got this old saw the other day, which I plan to turn into my dovetail waste removal device. You can see in the pick it looks quite dirty. This was taken after I took off a substantial amount of rust and grime.
It also took me about an hour to get the thumb screws loose. A little project for the coming months.
IMG_0738.jpg
-
23rd April 2019, 08:45 AM #11
Matt
It is similar but not quite the same. Check the curve of the frame on the non handle side.
I found myself wondering exactly what the difference is between the coping, fret and jeweller's saws. The coping saw seems to have a blade capable of rotation while the fret saw is fixed but has a much deeper frame. The jeweller's saw seems to have that sliding adjustment to the frame. However more research seems to indicate a degree of overlap and it may be more to do with the fineness of the blade which allows for tighter radii.
Thoughts?
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
24th April 2019, 08:03 AM #12
Paul,
You are spot on AGAIN after considering the points you pointed out and an in depth study of the pics (about 4 seconds)
Well spotted,
Cheers Matt.
Similar Threads
-
Boker saw sharpening vise
By dubrosa22 in forum ANTIQUE AND COLLECTABLE TOOLSReplies: 6Last Post: 8th May 2018, 01:18 PM -
Henry boker any info
By Not enough!! in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 6th April 2016, 10:01 AM -
Fret Saw
By Different in forum MUSICAL INSTRUMENTSReplies: 10Last Post: 20th February 2009, 07:02 AM -
boker pruning saw
By Farm boy in forum HAND TOOLS - POWEREDReplies: 2Last Post: 11th December 2005, 06:25 AM