Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Help with chisels/gouges
-
26th May 2017, 12:40 PM #1Senior Member
- Join Date
- Jul 2010
- Location
- Brisbane
- Posts
- 107
Help with chisels/gouges
GEDC0198.JPGGEDC0202.JPGGEDC0197.JPGGEDC0196.JPG
Hi all..
What can you tell me about the pictured tools.. sorry about the quality !
The long slim chisel is a Ward & Payne.. the 190 mm blade is rounded on one side and grooved for 150 mm on the other. it is 3.7 mm wide at the tip
The gouge has no makers marks only 7/8 for the width. It appears hand made and the tang/handle has been cut off by the former owner at approx 165 mm.
-
26th May 2017 12:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th May 2017, 09:02 PM #2
The Ward and Payne is possibly a paring gouge.
Probably from a Patternmakers kit.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
Similar Threads
-
Titan and Stanley chisels and gouges.
By clear out in forum WOODWORK - Tools & MachineryReplies: 4Last Post: 5th May 2017, 10:50 AM -
Stormont Archer Lathe Chisels and Gouges
By stevew in forum WOODTURNING - GENERALReplies: 2Last Post: 9th February 2008, 04:38 PM -
Longer and stronger gouges and chisels
By Kiwi Greg in forum WOODTURNING - GENERALReplies: 4Last Post: 12th August 2003, 06:08 PM