Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
5th December 2016, 07:15 PM #1New Member
- Join Date
- Dec 2016
- Location
- Canberra
- Posts
- 4
Strange block plane identification
I recently got a set of old planes and saws, which included this one unusual block plane I haven't been able to identify.
The body has the number 140 cast into it, but apparently not a Stanley 140. The handle is not the classic "rounded over" block plane style, but more like the top half of a normal bench plane handle. I couldn't find any marks other than the number 140.
The front knob is secured by a screw that comes up from the sole, rather than down through the top of the knob, which seems like a weird design choice.
Anybody know what this is?
Unknown 140 plane.jpgUnknown 140 disassembled.jpg
-
5th December 2016 07:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th December 2016, 06:21 AM #2
The finish on the timber parts Reminds of a Kunz plane but I have never seen a model that looks like this. A quick search under that name never revealed anything either.Also the body is usually green. Does the Tote and Knob look like they have been a User addition? Bit hard to tell from the images.
-
6th December 2016, 10:57 AM #3
I can't tell if it may have been converted by a past owner or not. The front knob looks like a bench plane knob and the rear handle has a sort of German look to it. Like on those horned wood planes. With a bit of spit and polish it should be a good user.
Regards
John
-
6th December 2016, 04:03 PM #4New Member
- Join Date
- Dec 2016
- Location
- Canberra
- Posts
- 4
They may have been replaced, but I think they must have been fairly similar in form to the original design. The cast body clearly has mounting points for a wooden handle with a long base, and the screw-from-the-bottom knob design looks to be original.
The plane feels comfortable in the hand, I think the shape of the handle is quite effective.
One possible flaw is that the back end of the iron is actually contacting the top of the handle -- seems like a bad idea, could be indicative that somebody switched in a custom handle and didn't allow enough clearance.
Thanks for the replies!
Similar Threads
-
Plane identification – plane aficiondos pls help
By Therapy in forum HAND TOOLS - UNPOWEREDReplies: 5Last Post: 5th December 2010, 02:15 PM -
Stanley Block Plane Identification?
By STAR in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 22nd May 2010, 10:19 PM -
A Compendium of Block Planes: The HNT Gordon Block Plane
By derekcohen in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 16th August 2008, 09:54 PM -
Block plane Identification
By kiwioutdoors in forum HAND TOOLS - UNPOWEREDReplies: 6Last Post: 16th April 2008, 10:21 PM -
strange plane
By gnu52 in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 23rd November 2004, 07:46 AM