![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
Results 1 to 1 of 1
Thread: Clock Restoration Project
-
18th February 2017, 05:40 PM #1
Senior Member
- Join Date
- Mar 2007
- Location
- Picton, NSW
- Posts
- 143
Clock Restoration Project
Hi Guys,
This is not a BUILB of a new clock (as most of the threads on this forum are), but just a RESTORATION of an old clock, so I hope you will allow me to indulge myself by sharing my "Christmas Holiday Project" (after all, there does not seem to be much happening around here at the moment.
I went to a local "flea market", just before Christmas, and found this lonely clock, in pieces, in a box on the ground next to a gentleman's table of wares. It is an Ansonia "Kitchen" or "Mantle" clock. It had several pieces of ornamentation broken off and one piece completely missing. The finish left much to be desired!
DSC_0943.jpg DSC_0944.jpg DSC_0953.jpg DSC_0952.jpg
On getting the clock home, and investigating further, I was able to determine that it was an Ansonia "America" model. This model was produced between 1880 and 1895. I presume, from the pencil inscription inside the case, and written BEHIND the movement, on the case, that it was originally sold on 11th August, 1890 (or was that 8th November, 1890??)
DSC_0947.jpg DSC_0958.jpg
First, I stripped back the original finish to bare wood, using methylated Spirits to dissolve the old shellac.
Second, I had to manufacture a replacement part for the missing "Grass tuft" ornament on the left hand side. I took the original clock to be made from American Mahogany, which is unavailable in Australia. However, I was able to find a bit of Queensland Maple, which has a similar grain. I traced the shape from the other side and cut out a mirror image to match. I was able to stain it to approximately match, using a mixture of Mahogany and Walnut stain
DSC_0959.jpg DSC_0984.jpg
Thirdly, I glued all the bits back together with some authentic "Hide Glue" that I got from a chinese e-Bay store for an=bout $3 -$4 and then brushed on 10 -12 coats of orange shellac.
DSC_0250.jpg DSC_0251.jpg DSC_0252.jpg
I am quite happy with the result!
I was able to strip down the movement, and clean it properly, polish the pivots, and oil it. So now, a 126 year old clock might get to see a few more years before it's life is over, and perhaps my kids or (yet non existent) grand kids might get to enjoy it too
Most importantly, I got at least ONE project completed over my Christmas break!
Enjoy!
Walesey
-
18th February 2017 05:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Sample of my restoration project
By chris_77 in forum RESTORATIONReplies: 2Last Post: 11th April 2014, 08:28 AM -
Restoration Project
By Jack W Burgess in forum WOODCARVING AND SCULPTUREReplies: 23Last Post: 3rd April 2012, 06:23 AM -
1st clock project
By jatt in forum CLOCKSReplies: 5Last Post: 28th November 2008, 12:27 AM -
Help! Split in restoration project...
By s_m in forum FINISHINGReplies: 9Last Post: 15th January 2004, 09:32 AM