Results 121 to 135 of 514
Thread: My Wooden geared clock
-
10th May 2012, 02:17 PM #121Rocket (Rod)
- Join Date
- Nov 2011
- Location
- Mickleham
- Posts
- 84
As per Russell's idea, I guess you don't have to have the axle in the centre of the block. By moving the axle either up or down, you can get some more meat around the axle, providing additional support.
Cheers
-
10th May 2012 02:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th May 2012, 08:07 PM #122
Dean been thinking re you design post 116 and you want for metal. My mill can cut this out of billet aluminium and then add a brass shaft. If yours can not and you want to go that way, even got the polish gear if you want.
Russellvapourforge.com
-
10th May 2012, 09:44 PM #123Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
Thanks Russell thats a generous offer....I would love the top cover plate to be made from some ally.....would look good against the purple heart. Lets talk more. Tonight I have been finalising the inner steel sleeve design and found some more issues to sort out. I found some 40mm tube today that is perfect for the job and will weld the axels on tomorrow morning. I will be able to wire up and hang some weights tomorrow night.
cheers
Dean.
-
12th May 2012, 01:15 PM #124Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
Hi all, here is a quick update. Have finished the upper mount for the wheels to sit on. It sits well and should be able to support the 5 kg.
Looks like the mini cogs need to be angled down some more or re-desgn the axel housing so that it sits on top of the 40mm purple heart frame bit.
Dont have the weights to test so will have to weight till monday...
Dean.
-
13th May 2012, 10:23 AM #125
Dean
I agree that the axle needs to move up to line up with the mini cogs. You can then use one piece axle across the top of your clamp, Much stronger this way.
What is the white string in photo?
Re;Quote
"Thanks Russell thats a generous offer....I would love the top cover plate to be made from some ally.....would look good against the purple heart. Lets talk more."
You still got my number, If so call when you are ready or PM me and we can make plans.
Russellvapourforge.com
-
13th May 2012, 06:26 PM #126Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
The string holds each axel in place when i take the front frame off; otherwise the axels sag and bend the bearings. It also help in re-assembling. I will call soon.
Dean
-
14th May 2012, 02:55 PM #127Rocket (Rod)
- Join Date
- Nov 2011
- Location
- Mickleham
- Posts
- 84
Novel way to fit the axle assembly. Good to see you solved the problem.
Cheers
-
14th May 2012, 03:45 PM #128Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
Thanks Rod,,actually decided to mount the shaft above the 40mm purplheart dowel. So its back to the solid modelling for now. As indicated the upper wheels are a bit too low. One problem solved another discovered. After testing the final weight wheels solution and finding it worked by and large I decided to remove my escarpment and see how much weight would be needed to move the gears. Inspired by john from post #98 ......"Dean, If your clock needs 6kg to turn the timing wheel you have, arbors and bearings are out of alinement, 1 kg should be enough to spin the timing wheel without the escapement attached. I designed my own clock, all Lignum Vitae (timber)bearing and arbors , running time with 2, 5kg weighs is over 70 hours now 6 years old , no signs of wear. John. I decided to put that to the test. I soon discovered why my clock wouldnt run on just 1KG. My ratched wheel is the problem. Its the only wheel that is not bearing mounted! and during the free weight test I discovered the ratched wheel (the one you use to wind the weights up) was jambing. I was under the impression that this gear did not turn with the rest of the clock; i thought that it only turned when you wound up the weights. Wrong!! It turns all the time. It now needs a complete re-design based on a square shaft arrangement. Other than that all is well other than the fact I accidently pushed my hour gear off the kitched table and now it is in 5 pieces....buggar...
Dean..
-
15th May 2012, 08:04 PM #129
I know it's a pain... but it good you found where the friction was coming from.
It is a sh*/t about broken the gear
Russellvapourforge.com
-
20th May 2012, 08:55 PM #130Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
Here is a pic of my broken hour gear....
The missing half is in about 5 pieces; it literally shattered. It must have been dry. I guess its an opportunity to make another 5 spoke wheel for the front of the clock. Because of the design of the new gear being made form 5 pieces of timber I know it wont explode if it gets knocket off any table.....not that I am planning to do that again any time soon.
Will spend this week re-making this and post the results. (the threadded bit is where the hour hand is attached).
cheers
Dean.
-
25th May 2012, 08:03 PM #131Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
Hi all here is a quick update on the weight wheels. These wheels will transger the 10 kg to the drum which powers the clock. There are four in all. They all have a bearing which is press fitted into place. Next the ally insert is fixed using two brass screws; this tacky arrangement is covered up with the cover plate which is held in place by 5 torx crews. The 6mm torx screw uses the spacer to hold the wheel against the bearing and holds it in place. Rather like those torx fastners.
.
To finish the wheels they need a groove to hold the line in place.
Dean
-
25th May 2012, 08:53 PM #132
Dean
I like the pulleys, well engineered.
How the replacement for the broken gear coming?
Russellvapourforge.com
-
25th May 2012, 10:04 PM #133Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
I got just about all the way to finishing when I noticed I had made an incorrect measurement! Buggar will have to start all over again next week.
Dean.
-
27th May 2012, 08:02 PM #134Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
Hi all just a quick update regarding the pully clamp. Here are some of the designs Russell & I has come up with
The second idea was mine but not that good. The first one was a response as to having the axel above the dowell rather that have it in the middle. The third pic is Russells brilliant design! Its soo much better than my initial idea. The last pic shows the engraving that will become part of the design. Hopefully Russell will be generously making the pulley clamp sometime time this week. Will post the final result soon. I must say this is a great forum to belong to! Such generous people!
Dean.
-
29th May 2012, 06:35 PM #135Senior Member
- Join Date
- Oct 2008
- Location
- sydney
- Posts
- 408
Hi all here is an update on my replacement hour gear.
Pic 1 shows the 5 pieces that make up the stock.
Pic 2 shows pieces 2,3&5 glued up and 1&5. I have found it more successful this way rather than try and press 1 final piece rather than 2. (does this make any sense?) to me it does!
Pic 3 shows the final completed stock for the gear.
The two holes in the stock are for locating the stock exacly to allow the gear to be cut out perfectly; these two holes have saved me hours in trying to align up the stock by trial and error.
Final pics tomorrow! finally!
cheers
Dean.
Similar Threads
-
Wooden clock
By Bear Stone in forum CLOCKSReplies: 3Last Post: 25th July 2011, 08:26 PM -
New Wooden Clock
By Davethenose in forum ANNOUNCEMENTSReplies: 5Last Post: 23rd November 2010, 07:37 PM -
Wooden geared clock -spring driven
By nine fingers in forum CLOCKSReplies: 8Last Post: 3rd November 2009, 04:29 PM -
Big wooden clock
By nine fingers in forum CLOCKSReplies: 3Last Post: 29th January 2009, 01:00 AM -
wooden geared clock
By nine fingers in forum WOODTURNING - GENERALReplies: 18Last Post: 4th July 2006, 02:24 PM