Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2013
    Location
    Prague
    Posts
    1

    Default Laminating questions

    Hello,
    I`m just starting a new GIS, cutting the plywood etc. As I had never been working with epoxy, there are some points I would like ask to more clever people.
    First, Michael and many others suggest to laminate the internal sides of plywood even before the dry assembly and before putting the other support elements for seats and centreboard, for example. Do I understand correct that even when gluing these elements later on the laminated surface, itwill hold strong enough?
    Second, when I mask, as suggested, the places for bulkhead frames and glue these later on, after the dry assembly, is it sure that the total surface will be entirely resistant to water?
    Thank you
    Jan, Prague

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Feb 2008
    Location
    Eustis, FL, USA
    Posts
    2,270

    Default

    Welcome to the forum.

    Laminating means bonding one thing to another, such as a layers of 'glass fabric or layers of wood together. I'll assume you actually meaning pre-coating the plywood, before you install the other structural elements. This usually has you taping and masking off areas you don't want any goo yet, such as where bulkheads will eventually live. This masking process insures the best bond with raw wood, when the next part gets installed.

    Yes, it'll hold much stronger than the wood itself.

    Do yourself a big favor and read up on previous threads about the issues and concerns you might have. It would also be a very good idea to down load the "The Gougeon Brothers on Boatbuilding" book at WestSystem.com and the users guides there as well, plus the "Epoxy Book" over at SystemThree.com. These texts (free) will nurse you through the basics.

  4. #3
    Join Date
    Feb 2013
    Location
    New London, Minnesota
    Posts
    181

    Default

    The bond will be so strong you would destroy the wood if you tried to pull two pieces apart.

Similar Threads

  1. TV Stand questions - thicknessing, laminating, warping
    By laxation in forum WOODWORK - GENERAL
    Replies: 0
    Last Post: 17th November 2011, 11:24 AM
  2. laminating help
    By larry1964 in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 29th May 2008, 07:30 PM
  3. Laminating
    By jow104 in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 26th October 2005, 05:39 PM
  4. laminating
    By arhey in forum WOODWORK - GENERAL
    Replies: 5
    Last Post: 29th October 2001, 01:53 PM
  5. Laminating ?
    By Shane Watson in forum WOODTURNING - GENERAL
    Replies: 13
    Last Post: 6th June 2001, 02:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •