Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 301 to 315 of 404
-
27th October 2009, 05:01 AM #301
Sooooo .... what's the job?
We have to judge whether it is acceptable employment!
MIK
-
27th October 2009 05:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th October 2009, 07:06 AM #302
They provide money. It's acceptable
Library cataloguer. Only casual so while it's full time now, if the work dries up, so does the boat building funding. On the other hand, provided I can average more than three days a week, I can keep the cat in cat food. I guess I'll have to make the next build another cheapie though, maybe a pacific maple PDR rather than a gaboon Shearwater
Richard
-
27th October 2009, 10:15 AM #303
-
30th October 2009, 10:51 AM #304
That is a tough job!
I helped one of my Taiwan friends work out that part of their course ... It is both art and science!
MIK
-
30th October 2009, 06:08 PM #305
-
31st October 2009, 05:28 PM #306
Shaped the rear seat top today and, after a lot of careful shaving away, the seat fits like a bought one and I'm slathered in sweat (it's in the thirties here today, more inside my tin shed).
No photo. Thanks to the heat, my ply seats all have a slight warp and they only fit when pushed down flat. Now I need to coat whatever's left to coat inside the seats, coat the underside of the seats and glue them on. What's the bet I don't get to it until next weekend
Richard
-
1st November 2009, 02:01 AM #307
That's the trouble with a job. Interferes with important stuff.
As Ken Maynard used to write in his Ned & his Neddy cartoons:
"Work is the curse of the drinkin' man."
congrats on getting paid employment anyway Daddles.
If you know anything about IP & data, I know where there might be something full-time.
Shift-work, on a 6-week rotation, but decent pay.
cheers
AJ
-
1st November 2009, 11:38 AM #308
Thanks AJ. What's 'IP & data' ?
Shift work is difficult for me unfortunately, one of the trials of being a single parent. The lad's old enough to be reasonably independent (though I still have to be there for him) but the lass is only 8 - I'm sort of restricted alternate weekends and not much late work during the week. That's one of the beauties of the current job, it all happens during normal 'Out of School Hours Care' timeframes ... and the lass loves OSHC because she gets fed and gets to play with her mates.
Richard
-
1st November 2009, 11:49 AM #309
After yesterday's post, I got back out and cut the holes for the inspection ports.
The front and rear seats were a little tricky to locate in that the ports can not go in the centre of the seat due to the central stringer and so you need to choose an asymetric layout based on how it looks ... and Jan wasn't around to help (she's much better with aesthetics than I am).
The centre seat was fun too in that if the ports were too close to the edge, the flare of the sides would restrict what you can put in there (the centre seat is a stowage area). However, I'll be placing my large rump on that seat and don't want to sit on a hatch. Add to that, one hatch is a 6" (for access to the prime stowage area) and the other is a 5" (because that's the size that has the bag shown area).
The photos show the solution. No, the boat isn't all skew iff like it looks in the photos, that's just a trick of camera angle.
Richard
-
1st November 2009, 12:15 PM #310
Richard -
You done good... Jan would be proud!
LBD is looking better all the time.
Bob
-
1st November 2009, 12:18 PM #311
Thanks mate.
Now I've got to finish sealing inside the seats (cleats and the like), seal the undersides of the seats and glue them in place. Here's where the sudden interuption of building time hurts because it could all be done in one hit ... if I had a complete day available ... which I will if I wait until next saturday. There's a lot you can do in an hour each evening, but not a job this big. The alternative is to do it in stages like normal people have to
Richard
-
1st November 2009, 01:03 PM #312
Normal?
What's that?
And how do we know?
Bob
-
2nd November 2009, 07:33 PM #313Member
- Join Date
- Jun 2009
- Location
- Brisbane
- Posts
- 79
Hi Richard
Its looking good.
Work is a pain, and I will be back again next week I hope.
I didnt bother with a hatch in the foredeck, maybe i should have for air expansion but I thought it too small an area for storage and you cant get much through a six inch hatch anyway. You will probably have seen what I did with the back hatch.
It is a boat you can look at and feel pleased about, isnt it?
Tom
-
2nd November 2009, 09:40 PM #314
Ta mate
Work is a pain, and I will be back again next week I hope.
I didnt bother with a hatch in the foredeck, maybe i should have for air expansion
but I thought it too small an area for storage
and you cant get much through a six inch hatch anyway.
It is a boat you can look at and feel pleased about, isnt it?
Richard
-
2nd November 2009, 09:48 PM #315Deceased
- Join Date
- Dec 2007
- Location
- Guernsey Channel Islands UK
- Age
- 54
- Posts
- 307
she's a nice looking boat Richard
it's one i may have to add to my wish list, which just seems to get bigger and bigger
Similar Threads
-
Oz PDR build in Adelaide - sexy black PDRacer
By m2c1Iw in forum Michael Storer Wooden Boat PlansReplies: 39Last Post: 27th April 2009, 06:30 PM -
Wherry style rowing boat
By Arron in forum BOAT DESIGNS / PLANSReplies: 30Last Post: 20th April 2009, 09:56 PM -
Two Foot Skiff
By bitingmidge in forum BOAT DESIGNS / PLANSReplies: 26Last Post: 24th May 2007, 12:28 AM -
Forward Facing Rowing System
By dopeydriver in forum MISC BOAT RELATED STUFFReplies: 7Last Post: 28th January 2007, 11:15 PM