Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 10 of 27 FirstFirst ... 5678910111213141520 ... LastLast
Results 136 to 150 of 404
  1. #136
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Third coat's on.

    Picture to satisfy those doubting types who think I'm doing this in my imagination

    And I've just realised I forgot to pull the tape before coming inside. Ah well, it can stay there, a quick with with the sandpaper will free the edges and up she'll come

    Oh goody, I get to do lots and lots of sanding tomorrow what with all the bulkheads and the sides Maybe I'll go boating in the rain instead

    Richard

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #137
    Join Date
    Mar 2007
    Location
    Adelaide
    Posts
    2,139

    Default

    What pic

    Nah that grain looks interesting on the transom

  4. #138
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Quote Originally Posted by m2c1Iw View Post
    What pic

    Nah that grain looks interesting on the transom
    Yeah, and the cheap pine on the inside is very seductive, pity it's all going to get painted

    Richard
    no, I'm not changing my mind about all paint, not with this boat ... it will have a little black dog painted on its transom though

  5. #139
    Join Date
    Jul 2005
    Location
    'Delaide, Australia
    Age
    65
    Posts
    8,138

    Default

    If it is as cool as the Redback on Redback, that will be great.

    MIK

  6. #140
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Quote Originally Posted by Boatmik View Post
    If it is as cool as the Redback on Redback, that will be great.

    MIK




    Richard

  7. #141
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    I started stuffing around with that skinny little, triangular stick thing that goes in the pointy bit of the boat today.

    STORER, WHAT ON EARTH WERE YOU THINKING!

    Dainty, delicate, fiddly flaming thing to make. Surely just tying the bow together and whacking in a fat slug of a fillet would work better.

    Meanwhile, anyone who's managed to make one of these things, please feel free to offer advice ... though I'm about to head out into the shed and continue my pathetic efforts

    Richard

  8. #142
    Join Date
    May 2008
    Location
    Portland, ME USA
    Posts
    837

    Default

    Richard, You should have seen the size of the stem before the corrections, even skinnier!

    Kids made ours by cutting on the bandsaw and planing to the line. The hardest part, and most important part, is to make sure the stem (glue) surface is not convex, but concave so that the glue can stay in there. Usually, I'm used to having my stem bevel be off enough with kids that I don't worry about this...the gap in the stem means the glue won't get excessively squeezed out.

    The stem looks prettier than the fillet!

    Clint

  9. #143
    Join Date
    Jan 2009
    Location
    São Paulo, Brazil
    Posts
    47

    Default

    Quote Originally Posted by Daddles View Post
    I started stuffing around with that skinny little, triangular stick thing that goes in the pointy bit of the boat today.

    STORER, WHAT ON EARTH WERE YOU THINKING!

    Dainty, delicate, fiddly flaming thing to make. Surely just tying the bow together and whacking in a fat slug of a fillet would work better.

    Meanwhile, anyone who's managed to make one of these things, please feel free to offer advice ... though I'm about to head out into the shed and continue my pathetic efforts

    Richard
    Frightening, isnt it? I followed the idea from a photo blog set - not at my office computer so have not got the link - will post it when I get to the office. The idea is to mark the lines carefully and then saw carefully down to the lines vertically at 2cm (1inch) intervals. Then hack out the intervening bits of wood with a sharp chisel, then a rasp and sandpaper. If the wood has good, regular grain this works. When I did it, one unexpected chunk of wood came out beyond the lines - I filled with that epoxy filler paste and sanded it down again. Does not look pretty, but it will not be visible

    Any help?

    Steve

  10. #144
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Well, I've done it.

    Piccies shown below.

    Planing the rectangular shape isn't so hard although the bit of wood I had was a good cm oversize and that needed planing down.

    The difficulty is in making the triangular section.

    I did this by nailing some sticks to the bench and using these as a rest - visible in the photos. For the first side, I had the stem piece sitting flat on the bench and this worked well. To do the other cut though, I found that no only was the plane too far tilted, the angle of the planing pressures tended to flick the stem out ... so I added a couple more props to make the planing surface more or less horizontal. This supported the stem to enable me to do the second cut, all done with the plane.

    Initially, the rear support was shorter than the stem and I found this allowed the stem to flick out as soon as you started planing - adding the second piece to make that back support full length cured that problem.

    The underneath supports for the second cut would have been better full length too but I didn't have another stick long enough. You do want them to support the stem right out near the tip, otherwise you'll find yourself flicking the stem out - I planed a corner off my piece of scrap so that the stem was resting flat upon it.

    The best solution would be to have a purpose built triangular rest for the stem to sit in but I wasn't going to make something like that for this job.

    Anyways, it's been done. My stem is a mm or two undersized at the top unfortunately but if you lot promise not to tell Mik, he won't lose any sleep over it

    Richard

    and a quick look tells me that these posts were about an hour apart - in that time, I planed the bevels on the stem, uploaded the photos and made this post, plus was distracted by Jan turning up for a chat - the job is scary rather than long

  11. #145
    Join Date
    Jan 2009
    Location
    São Paulo, Brazil
    Posts
    47

    Default

    Quote Originally Posted by Daddles View Post
    Well, I've done it.

    Piccies shown below.

    Planing the rectangular shape isn't so hard although the bit of wood I had was a good cm oversize and that needed planing down.

    The difficulty is in making the triangular section.

    I did this by nailing some sticks to the bench and using these as a rest - visible in the photos. For the first side, I had the stem piece sitting flat on the bench and this worked well. To do the other cut though, I found that no only was the plane too far tilted, the angle of the planing pressures tended to flick the stem out ... so I added a couple more props to make the planing surface more or less horizontal. This supported the stem to enable me to do the second cut, all done with the plane.

    Initially, the rear support was shorter than the stem and I found this allowed the stem to flick out as soon as you started planing - adding the second piece to make that back support full length cured that problem.

    The underneath supports for the second cut would have been better full length too but I didn't have another stick long enough. You do want them to support the stem right out near the tip, otherwise you'll find yourself flicking the stem out - I planed a corner off my piece of scrap so that the stem was resting flat upon it.

    The best solution would be to have a purpose built triangular rest for the stem to sit in but I wasn't going to make something like that for this job.

    Anyways, it's been done. My stem is a mm or two undersized at the top unfortunately but if you lot promise not to tell Mik, he won't lose any sleep over it

    Richard

    and a quick look tells me that these posts were about an hour apart - in that time, I planed the bevels on the stem, uploaded the photos and made this post, plus was distracted by Jan turning up for a chat - the job is scary rather than long
    Glad you managed it. Found the link (it is actually the Duckworks site) - has some other useful tips so here it is:

    www.duckworksmagazine.com/08/projects/gis

  12. #146
    Join Date
    Oct 2008
    Location
    Victoria
    Age
    71
    Posts
    631

    Default

    Mate, did you buy those perfect shavings from the 'Look-Busy Woodworker's Centre'? They sell dirty leather aprons, pre-chewed carpenters pencils, full vacuum bags and spray-on boot dust too...

    Not often we are treated to evidence of plane work here. Glad you sorted it out. Never doubted you would.
    I'm off to the airport now...
    What caused the Pacific War? A book to read: here

    http://middlething.blogspot.com/

  13. #147
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Quote Originally Posted by StephenR View Post
    Glad you managed it. Found the link (it is actually the Duckworks site) - has some other useful tips so here it is:

    www.duckworksmagazine.com/08/projects/gis
    I didn't see your post until I came back in to announce success ... and then I had Jan waiting while I put up my post so I wasn't able to acknowledge yours or Clints.

    As for your method of cutting to the line and then chiselling out the bits - great method and I've used it for other jobs and yes, don't you just love being let down by a bit of wonky grain in the timber. In this case, I was pretty sure I could get the plane to work and sure enough, I did ... sort of.

    Now to wander off to your GIS link to see what they've done there

    Richard

  14. #148
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Quote Originally Posted by rob540 View Post
    Mate, did you buy those perfect shavings from the 'Look-Busy Woodworker's Centre'? They sell dirty leather aprons, pre-chewed carpenters pencils, full vacuum bags and spray-on boot dust too...

    Not often we are treated to evidence of plane work here. Glad you sorted it out. Never doubted you would.
    I'm off to the airport now...
    They're possibly just a wee bit too fat, they're not those lovely rice paper thin wafers you can get if you're really really lucky/skilled. However, the job was to remove timber in a hurry and that was happening - I reckon they're just a poofteenth inside the max thickness shaving you can cut cleanly

    What are you doing at the airport? Should we watch the news?

    Richard

  15. #149
    Join Date
    Jul 2005
    Location
    'Delaide, Australia
    Age
    65
    Posts
    8,138

    Default

    Quote Originally Posted by rob540 View Post
    Mate, did you buy those perfect shavings from the 'Look-Busy Woodworker's Centre'? They sell dirty leather aprons, pre-chewed carpenters pencils, full vacuum bags and spray-on boot dust too....
    I believe Richard is one of the suppliers

  16. #150
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    67
    Posts
    4,377

    Default

    Quote Originally Posted by rob540 View Post
    Mate, did you buy those perfect shavings from the 'Look-Busy Woodworker's Centre'? They sell dirty leather aprons, pre-chewed carpenters pencils, full vacuum bags and spray-on boot dust too....
    Quote Originally Posted by Boatmik View Post
    I believe Richard is one of the suppliers
    This week only, stocks limited, I have a special going on pre-chewed pencils that have been sharpened with a chisel

    Richard

Similar Threads

  1. Oz PDR build in Adelaide - sexy black PDRacer
    By m2c1Iw in forum Michael Storer Wooden Boat Plans
    Replies: 39
    Last Post: 27th April 2009, 06:30 PM
  2. Wherry style rowing boat
    By Arron in forum BOAT DESIGNS / PLANS
    Replies: 30
    Last Post: 20th April 2009, 09:56 PM
  3. Two Foot Skiff
    By bitingmidge in forum BOAT DESIGNS / PLANS
    Replies: 26
    Last Post: 24th May 2007, 12:28 AM
  4. Forward Facing Rowing System
    By dopeydriver in forum MISC BOAT RELATED STUFF
    Replies: 7
    Last Post: 28th January 2007, 11:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •