Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2007
    Location
    eaton
    Posts
    87

    Default Part of my ongoing effort to educate the masses.

    You'll love the logic here.




    The U.S. standard railroad gauge (distance between the rails) is 4 feet, 8.5 inches. That's an exceedingly odd number. Why was that gauge used? Because that's the way they built them in England, and English expatriates designed the U.S. railroads. Why did the English build them like that? Because the first rail lines were built by the same people who built the pre-railroad tramways, and that's the gauge they used. Why did 'they' use that gauge then? Because the people who built the tramways used the same jigs and tools that they had used for building wagons, which used that wheel spacing.

    Why did the wagons have that particular odd wheel spacing? Well, if they tried to use any other spacing, the wagon wheels would break on some of the old, long distance roads in England, because that's the spacing of the wheel ruts.
    So, who built those old rutted roads?
    Imperial Rome built the first long distance roads in Europe (including England) for their legions. Those roads have been used ever since. And the ruts in the roads? Roman war chariots formed the initial ruts, which everyone else had to match for fear of destroying their wagon wheels.


    Since the chariots were made for Imperial Rome, they were all alike in the matter of wheel spacing. Therefore, the United States standard railroad gauge of 4 feet, 8.5 inches is derived from the original specifications for an Imperial Roman war chariot.
    In other words, bureaucracies live forever. So the next time you are handed a specification, procedure, or process, and wonder, 'What horse's ass came up with this?', you may be exactly right. Imperial Roman army chariots were made just wide enough to accommodate the rear ends of two war horses. Now, the twist to the story:


    When you see a Space Shuttle sitting on its launch pad, you will notice that there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol at their factory in Utah.

    The engineers who designed the SRBs would have preferred to make them a bit larger, but the SRBs had to be shipped by train from the factory to the launch site. The railroad line from the factory happens to run through a tunnel in the mountains, and the SRBs had to fit through that tunnel.
    The tunnel is slightly wider than the railroad track, and the railroad track, as you now know, is about as wide as two horses' behinds.


    So, a major space shuttle design feature of what is arguably the world's most advanced transportation system was determined more than two thousand years ago by the width of a horse's ass.
    Now you know: Horses' asses control almost everything .... Explains a whole lot of stuff, doesn't it?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2010
    Location
    ACT
    Age
    84
    Posts
    2,579

    Default

    QED
    Hugh

    Enough is enough, more than enough is too much.

  4. #3
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,975

    Default

    Immmmmmmm

  5. #4
    Join Date
    Aug 2004
    Location
    Perth WA
    Posts
    2,035

    Default

    I guess then its horses for courses
    Experienced in removing the tree from the furniture

  6. #5
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,373

    Default

    Makes a whole lot of horse sense to me.......
    The person who never made a mistake never made anything

    Cheers
    Ray

Similar Threads

  1. Centre of Effort - Part II
    By derekcohen in forum HAND TOOLS - UNPOWERED
    Replies: 4
    Last Post: 18th March 2014, 10:25 AM
  2. Time To Educate Daryl (again!)
    By DarBee in forum METALWORK FORUM
    Replies: 5
    Last Post: 24th May 2013, 12:01 AM
  3. The ongoing saga of the ML392
    By BobR in forum HAND TOOLS - POWERED
    Replies: 231
    Last Post: 14th November 2011, 08:52 PM
  4. Spokeshave - Please educate me
    By Clinton1 in forum HAND TOOLS - UNPOWERED
    Replies: 28
    Last Post: 13th July 2007, 03:49 PM
  5. Could someone please educate the ignorant Canadian?
    By JohnnyR in forum HAND TOOLS - POWERED
    Replies: 9
    Last Post: 12th November 2006, 05:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •